Most pocket ratchet drivers try to do too much. The bit storage is too small. The ratchet feels loose. The bonus extension is a wobbly stick that ends up in a drawer. FixMan fixes all three at once. It’s a 144-gram Grade 5 titanium driver. The spinning chamber holds 10 standard 1/4-inch bits. The three-mode ratchet has a real lock. And a bolt-action sleeve pushes the bit 26 millimeters deeper than the body alone. The EDC crowd is voting fast. The Kickstarter campaign cleared more than six times its funding goal in less than a week.
Price: From $169
Where to Back: Kickstarter
FixMan is the follow-up to Eck Studio’s FixBoy. The Hong Kong team launched FixBoy in May 2025, raised HK$645,835 from 890 backers, and finished shipping by November 2025. So this isn’t a first-time studio with a render and a dream. The new tool keeps the revolver-chamber design, doubles the bit count to ten, adds a three-mode ratchet, and stacks on a bolt-action deep-reach sleeve. The campaign runs through July 17, 2026. That leaves three weeks to lock in early-backer pricing.
How the Revolver Chamber Carries the Load
The chamber is the heart of the tool. It’s roughly the size of a C battery and packs 10 bits into 10 individual magnetic wells, so they don’t fall out when the chamber spins. Turn it to the one you need, click it in place, and drive. The campaign ships preloaded with Phillips, slotted, hex, and Torx bits in the most-used sizes.
Slot length matters more than slot count. FixMan fits bits up to 53 millimeters, enough for the long-reach bits most pocket drivers can’t carry. That’s where cheaper drivers fail, on furniture screws and deep electrical work.
The spinning chamber is also a fidget magnet, and Eck Studio engineered for it. The rotating cap rides on an ABEC-7 bearing with a user-replaceable ceramic inside. That’s why tools like this end up in pockets instead of drawers.
The chamber is CNC-machined titanium and stonewashed by default. Backers can also pick a black PVD finish, custom engraving, a leather sheath, and tritium-ready slots. That’s for buyers who want the version that looks like it belongs in a watch box.
The Bolt-Action Move That Changes the Math
Pocket drivers usually have to pick one: small body or long reach. FixMan does both. A bolt-action sleeve hides inside the body, slides out for tight spots, and locks back flush when you don’t need it.
The extra reach is 26 millimeters. That sounds small, but it’s the difference between sinking a screw inside a laptop hinge and giving up to grab the full-size driver. For desk-side electronics work, that’s the spec that earns the price by itself.
The bit holder also fits the long-reach bits that ship with the campaign, so you can stack the bolt-action sleeve with a longer bit for very deep screws. The campaign claims the sleeve locks securely under torque, and the CNC-titanium build supports that on paper. The real-world feel is the part that needs hands-on time. Backer units start shipping October 2026.
Where the Ratchet Earns Its Place
The ratchet has three modes: tighten, loosen, and locked. Most pocket ratchets get the locked mode wrong. A sloppy lock means the tool spins in your hand under load, rounding off the screw head. FixMan’s ratchet is built from CNC-machined titanium. That’s the kind of build a real lock needs.
A magnetic 1/4-inch tip holds the bit while you move the driver around. That sounds obvious, but plenty of tools at this price still skip it.
How FixMan Stacks Up Against the Typical Pocket Driver
The closest tools are the compact titanium pocket drivers that have been popular since 2024. Most cap out at five or six bits and skip both the ratchet and the extension. FixMan packs in all three: 10 bits, a three-mode ratchet, and a bolt-action sleeve. And it’s still pocket-sized at 144 grams.
The 144-gram weight is the part that surprises on paper. A normal steel ratcheting screwdriver with bit storage starts around 280 to 350 grams. So FixMan is about half the weight of what most workshop drivers carry on a belt. That’s what titanium buys you.
For desk-setup folks, fix-it-yourself homeowners, and the EDC crowd that already carries a knife and a flashlight, this fills a gap. Most pocket carries skip a real driver. FixMan is a real driver with a real ratchet, not a multitool nub.
What Backing Now Gets You
The Super Early Bird tier opens at HK$1,324 (about US$170), capped at 100 backers. Average pledges are tracking at HK$1,597, which means most backers are stepping up to add-on tiers. Backer units ship October 2026, and the campaign closes July 17. That’s three weeks to lock in the discount.
Add-ons stack on the base pledge, so what lands in your mailbox can range from a plain working tool to a custom piece with engraving and tritium accents. Backers who want the heirloom version build it now. Late-comers pay retail.
- Base FixMan in stonewashed titanium or black PVD, preloaded with the 10-bit set
- Optional leather sheath for belt or bag carry
- Optional engraving for personalization
- Optional tritium slots for low-light visibility
Who Should Pull the Trigger, and Who Should Skip
Buy it if you carry tools every day. Buy it if you work on small electronics, build furniture, or do site work. Buy it if you keep re-routing a desk setup. The 10-bit capacity and the bolt-action sleeve cover the two ways most pocket drivers fail in real use.
Buy it if you already own a titanium EDC kit. FixMan slides right into that carry without adding the weight of a steel driver. For more on the category, our roundup of The 7 Best Pocket Multitools Under $100 for Your Mid-2026 EDC covers the wider field. And our list of 10 Digital EDC Tech Essentials We’d Never Leave Behind (2026) covers the gear that usually rides alongside a driver like this.
Skip it if you already own a full-size ratcheting screwdriver and never carry one in your pocket, or if the only screws you turn are picture-frame hangers. The price jump from steel to titanium won’t pay you back if the tool lives in a drawer.
Skip it if “Kickstarter” is a dealbreaker for you. That said, the FixBoy track record up top is real. Eck Studio took it from launch to fully shipped inside a year. Still, one shipped project isn’t a long history, and any crowdfunded EDC carries the usual shipping-delay risk.
The Bottom Line
FixMan is the first pocket ratchet driver in a while that doesn’t cut corners on bit count, ratchet quality, or reach. The chamber holds 10 bits. The ratchet locks instead of slipping. And the bolt-action sleeve adds 26 millimeters of reach without bolting on a separate piece.
Price: From $169
Where to Back: Kickstarter
Will the ratchet feel hold up after six months of pocket carry? The campaign can’t prove that yet. But the math is doing the talking. More than six times funded in under a week, off a studio that already shipped its previous Kickstarter. If your daily carry is missing a real pocket driver, back it now and save the early-backer pricing. The verification will come with the first shipping units. By then, the discount is gone.
Gerber Gear 22-47162N Fast Draw Folding Assisted Opening Pocket Knife, Fine Edge, Black
(as of June 22, 2026 18:55 GMT -05:00 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
