Raptic Rise Headphone Stand with Wireless Charger review

If you buy something from a link in this article, we may earn a commission. Learn more

Raptic Headphons Stand 7
REVIEW – I have lots of headphones (at least 9 sets) that hang around my workstation. I use wall mounted hangers for most of them, but it would be nice to have a desktop headphone stand for my daily use headphones. The Raptic Rise Headphone Stand and wireless charger is not just a headphone stand, but also a wireless charger for my phone and it can charge the headphones as well via USB. Let’s give it a try!!

What is it?

The Raptic Rise Headphone Stand with Qi wireless charger features a headphone stand and a 12W Qi wireless charging pad to power up your wireless charging-compatible phone. There is also a USB-A port for charging headphones and other devices.

What’s in the box

Raptic Headphons Stand 11 x Raptic Rise Headphone Stand with Wireless Charger
1 x AC Adapter with USB-C Cable

Design and features

  • Solid aluminum headphone stand built to hold your Beats, Bose, Sony, or any over-the-ear headphones.
  • The base pad provides up to 12W for the fastest possible wireless charge for your phone
  • Product Dimensions: 5.1 W x 4.0 D x 10.6 H (inches), 14.7 oz
  • USB-A port in back to charge your headphones
  • Cable management system on bottom to coil access wires

The base is a weighted base with the surface as a Qi wireless charging pad.
Raptic Headphons Stand 2On the back of the base, there is a USB-C port power port and a USB-A port for charging devices/headphones.
Raptic Headphons Stand 3Underneath the base, there are 2 screw holes for you to attach the headphone stand/hanger.
Raptic Headphons Stand 4The next photo shows the headphone stand with the 2 screw holes for it to be attached to the base.
Raptic Headphons Stand 5

Performance

The setup for this headphone stand is basic. You just have to screw in the upright to the base. Well, the very small screws have to fit in a tight screw hole, and rather than a Phillips screw head, they provide an Allen key to use on screws with a shallow screw head. This was a totally ridiculous part of putting this together. If this was not a review, I would have grabbed 2 small screws with a Phillips head from my kit. The photo below shows how the screws ended up, and as you can see, one of them was just impossible to screw all the way in using the provided Allen key.
Raptic Headphons Stand 6The photo below shows it all set up with headphones on it that are being charged and an iPhone wirelessly charging. I expected a somewhat quick charge, but it seems to charge my phone quite slowly.
Raptic Headphons Stand 7

What I like

  • The design
  • The wireless charging capability
  • The dual charging

What I’d change

  • The screws provided to attach the stand to the base

Final thoughts

This Raptic Rise Headphone Stand with Wireless Charger has a nice weighted base that is not too heavy but enough to support even large headphones. The ability to charge the headphones while they are on the stand and the inclusion of the Qihe wireless charging pad are nice features. The issue with the screws provided is just a nuisance issue. However, IMHO, it is expensive for what it is.

Price: $69.99
Where to buy: Raptic website
Source: The sample for this review was provided by Raptic.

3 thoughts on “Raptic Rise Headphone Stand with Wireless Charger review”




  1. Gadgeteer Comment Policy - Please read before commenting
  2. Hey Man, Sorry.. i cant identify the headphones that was used in the pics for this article.. so im .. wanting to know. by asking u direct. ehehehe.. what headphones is that???

  3. On the last photo the headband is compressed so badly by sharp corners – this will damage headband in long run. I prefer rounded corners of the top base.

Leave a Comment

Your email address will not be published. Required fields are marked *