Speck SeeThru Satin and TuckPack Cases for the 13″ MacBook Review

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

speck bothcases smWhere Julie protects (covers up) the dings and scratches she puts in/on her MacBook Pro with stickers, I prefer to protect my laptop with something more substantial. Most recently I have been using the Vaja i-volution Leather Suit I reviewed late last summer to protect my Unibody MacBook. But while the Leather Suit is very protective, it adds a pound of weight to your laptop and some would argue that it impedes heat from dissipating. Speck produces many products engineered to protect your precious tech equipment. Recently they have added a new variant of their SeeThru line of form-fitting shells for MacBooks; the SeeThru Satin case.

Meredyth reviewed Speck’s original SeeThru case for the MacBook Pro back in 2006. Since then, Speck has continued to tweak this form-fitting case to accommodate Apple’s design changes in their laptop line. Last year, Speck released the SeeThru case in Satin. The semi-translucent plastic case looks pretty much the same, but has been given a soft, rubbery texture and feel. Speck describes it as having a ‘a grippy edge’ that is ‘silky-soft to the touch’.

speck seethrusatin caseoff

As you can see, the SeeThru Satin case is actually two pieces, one covers the top and the other the bottom of your laptop.Speck explains it best: the ‘SeeThru Satin is made of our special hard polycarbonate plastic with an added soft-touch rubberized exterior coating to give it it’s silky and grippy feel’.

speck seethrusatin install

Installation was literally a snap. Speck recommends cleaning the exterior of the MacBook to prevent anything to get between the laptop and cover that might scratch its aluminum casing. Speck even goes so far as to include a dedicated cleaning cloth to make that step even easier.

speck seethrusatin tabs

Once the exterior is cleaned, the SeeThru pieces click into place. They are held securely in place by small tabs along the edge of each of the pieces.

speck seethrusatin topbottom

The case fits my MacBook perfectly. It is 100% form fitted. Speck has engineered venting on the bottom of the case for heat dissipation and rubber feet to keep the case from sliding around.

speck seethrusatin front

The leading edge of the SeeThru Satin case provides access to the latch opening and the power indicator.

speck seethrusatin back

The back of the case covers the back edges of the unibody MacBook but leaves the hinge exposed so that it may operate correctly.

speck seethrusatin left

The right side allows access to the disc drive slot.

speck seethrusatin right

The left side allows access to the power, ethernet, usb, video, mic, earphone, and lock ports.

speck seethrusatin apple1

The SeeThru Satin case is available in black, pink, purple, and red; all adding some color to your MacBook while allowing the world to see the Apple logo shining through. The case feels great to carry around. While this case does not provide as much protection as Vaja’s i-volution Leather Suit, it does provide very good protection at a fraction of the weight and cost.

Speck TuckPack Slipper Case for 13″ Laptops

speck tuckpack logo2

If you are bolder than I am and prefer to use your laptop without a form-fitting, 24/7 case/shell you might choose to transport your computer in a slipper case like Speck’s TuckPack.

speck tuckpack frontback

The TuckPack is a well made, padded slipper case. The exterior is a rugged nylon with double stitched piping around the edges.

Features:

  • Ideally sized to hold up to a 13″ MacBook or similar-sized notebook
  • Compact, lightweight, stylish notebook protection
  • Slim design ideal for carrying or placing inside a bag or pack
  • Adjustable, removable, padded seatbelt-quality shoulder strap
  • Durable exterior with double-needle stitched bindings
  • Thin front inner pocket for quick access to documents
  • Duraflex high-performance buckles
  • Secure velcro closure
  • Holds notebooks sized up to 1.5″ thick, 9.5″ deep, 13.5″ wide
  • One year Speck limited warranty

speck tuckpack inside

The interior has silky soft lining. The flap is nicely stitched as well.

speck tuckpack slidingin

My 13″ MacBook easily slips inside.

speck tuckpack MBinside

The TuckPack is sized to hold up to a 13″ MacBook or similar-sized notebook/netbook. The interior material is silky soft/smooth and provides good padding on all sides of the laptop.

speck tuckpack satin

The TuckPack is really only designed to carry a naked 13″ laptop/MacBook. When I put my MacBook with the SeeThru Satin inside the TuckPack the fit was pretty tight.

speck tuckpack designs1

The TuckPack is available in three designs:

  • Speakeasy Grey Pinstripe
  • Restart Greyscale Pixel
  • Velocity Plum Stripe

speck tuckpack strapclip

Speck has engineered hidden clips to the back of the sleeve to attach a shoulder strap for additional carrying choices (over your shoulder versus tucked under your arm).

speck tuckpack shoulder

As slipper cases go, Speck’s TuckPack is a good bang for the buck. At $40, this padded sleeve provides a great, safe, protected way of carrying around your 13″ MacBook or MacBook Pro.

7 thoughts on “Speck SeeThru Satin and TuckPack Cases for the 13″ MacBook Review”




  1. Gadgeteer Comment Policy - Please read before commenting
  2. I have the purple satin case and it is great. Better, in my view, than the transparent one I had for my old Mcbook because that did seem to restrict screen opening slightly.

    The only thing to watch for is that over time, dirt can get into the case, especially the base. ( Maybe I need to stop eating lunch while typing) I would be slightly worried that over time this dirt, if not removed will rub between the case and the Macbook. I seperated the two recently and was suprised to find dirt in there which was leaving small marks on teh aluminum unibody. So would defiently recommend a periodic check to be safe.

  3. I am fascinated by the looks and protection this thing offers. I would like to know if this thing would increase the heat of the latop, although it has some vents, looks like it opens only a portion of the bottom. And also, is the weight that it adds to the screen substantial enough to screw the hinge connecting the screen and the body. Please let me know. Thank You.

  4. New Macbook Pro’s heat vents are not located at the bottom, as you may notice, the entire bottom is sealed up pretty tight. The vents are located at the hinge and at the keyboard as well –hence any case would not affect the laptop’s temperature. The heating of the bottom part of the Macbook is addressed by the small openings beneath the case.

    The case that covers the screen virtually adds no weight so I doubt if it will screw with the hinge.

    I got the hard shell case for my 13″ (clear) and it looks absolutely gorgeous —contrary to what I thought before that it might take away the elegance of the aluminum.

Leave a Comment

Your email address will not be published. Required fields are marked *