Bluetake BT510 Bluetooth Mouse Review

If you buy something from a link in this article, we may earn a commission. Learn more

Product Requirements:
Device:
Windows XP,2000,ME,98SE
Mac OS X 10.2.6 or higher

After reviewing the

Logitech MX1000 Laser Cordless mouse
about 8 months ago, I happily
retired my run of the mill wired mouse to a drawer. I really love the MX1000,
but I’m not so enamored that I won’t try something new when it comes along.
You never know when something better might be lurking out there. So, when
Bluetake asked if I would like to review
their BT510, I said sure! Having reviewed their

BT500
mouse, I was anxious to see if any of my criticisms would still hold
true with this new model.

bluetake bt510 4

Hardware Specs

Bluetooth Class 2, up to 10 meters
Carrier Frequency: 2.402~2.480GHz
Data Rate: up to 723 Kbps
Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum)
Antenna: Internal antenna
Bluetooth Profile Supported: Human Interface Device Profile (HID)
Power: Power DV 3V (AAA Battery x2 ) or DC 5V (USB DC Input)
Dimensions: 94.1 x 57.6 x 33.2mm

Package Contents

BT510 Bluetooth Mini Mouse
Quick Setup Guide x1
Utility CD
2 AAA Alkaline Batteries
USB spare power cable
Pouch
 

The BT510 is a two button, scroll wheel, 800 dpi optical
mouse.
Weighing in at 3 ounces with 2 AAA batteries installed, it is 1
ounce heavier and a bit larger overall than the BT500. It is still smaller than
a standard sized mouse, and definitely smaller than my MX1000. In my opinion,
this puts the BT510 in the travel mouse category. This holds true as most
desktop computers do not have Bluetooth built in, while many notebook computers
do.

bluetake bt510 1
Left to right: BT500, BT510, MX1000

The style of the BT510 is quite a bit different than BT500. According to
Bluetake’s site, this mouse has a new fangled design. In my
opinion, it’s just more modern looking. Available in black or white, the mouse
is made of shiny plastic with a soft rubber scroll wheel between two buttons
which have definite tactile feedback.

I’m not going to go through all the steps necessary to set up a Bluetooth
adapter on your computer. This review assumes you already have that setup
completed. So,
once that process is out of the way, you need only install the 2 AAA batteries
into the mouse by removing the upper shell. This is done by sliding
the lock on the bottom of the device to the unlock position. The upper shell can
then be removed revealing the battery compartment.

bluetake bt510 2
bluetake bt510 6

Once the batteries are installed and the upper shell snapped back into place,
you can then slide the power switch to the On position. When powered on, the
optical sensor on the bottom of the mouse glows a bright red. Pressing and
holding the connect button next to the sensor will enable the mouse to pair with
the computer.

After successful pairing, you’re on your way to using the mouse. As far as
mice go, this one is smooth to use and I had no problems using it without a
mouse pad. The scroll wheel is very responsive, not sluggish like the previous
model. As far as lag or delays, the only thing I’ve noticed is that if the
computer has gone into screensaver mode, it will take a few strokes of the mouse
before the computer responds. Otherwise, I’ve been happy the performance of this
mouse.

bluetake bt510 3

A nifty feature of the BT510, is the ability to switch left and right mouse
buttons. This is done by holding down the scroll button and  either the left or right
button for a few seconds. This is great for lefties.

Unlike my MX1000, the BT510 does not have rechargeable batteries or anyway to
know how much juice is left in the installed batteries. This was my biggest
complaint about the BT500, and continues to be so with the BT510 as well. Bluetake has taken steps to make this issue a
little less important, as they have included a detachable USB cable for powering
the mouse when the batteries are dead. This doesn’t mean that you can use the
BT510 as a USB mouse though… The USB cable is only for drawing power, and
nothing else. If you install NiMH cells into the 510, the USB power cable will trickle-charge the cells. Radtech chose to not advertise this fact in the event people would attempt to charge non-rechargeable batteries, which may heat up and swell. So be warned…

bluetake bt510 5

Power issues aside, the BT510 is a nice improvement over the BT500. The bigger size makes it a
little more comfortable to use for extended periods of time, and the addition of
the USB cable ensures that you can use the mouse even after your batteries die.
Sixty dollars may be a lot to pay for a small Bluetooth mouse, but if I were
shopping for one, this one would be at the top of my list.

 

Price: $59.95

Pros:
Wireless
Ability to use USB cable to power device when batteries are not available
Small size

Cons:
Can’t use as a USB mouse
No battery level indicator

 

Product Information

Price:59.95
Manufacturer:Bluetake
Pros:
  • Wireless
  • Ability to use USB cable to power device when batteries are not available
  • Small size
Cons:
  • Can't use as a USB mouse
  • No battery level indicator

7 thoughts on “Bluetake BT510 Bluetooth Mouse Review”




  1. Gadgeteer Comment Policy - Please read before commenting
  2. One other con I would add, although it falls in under the “Can’t use as a USB mouse”.
    It doesn’t support UNIX/Linux. Most of the USB cordless mice work without special
    drivers as a standard/default USB mouse. I’ve plugged my Cordless Logitech into
    systems using: MacOS, WinXP, Solaris and SUSE linux. But still, it’s an interesting
    alternative, if you are USB-port limited.

  3. I bought the BT510 mouse and I intend to use it on my new MAC G4 PowerBook (using OS X ver 10.4.1) However when I use the mouse I cannot put the computer to sleep neither MANUALLY nor with the set time schedule. I tried many things (including disabling the “allow bluetooth devices to wake up this computer” option in the Preferences section.

    I also noticed that even though the bluetooth detects the BT510 (and I can use the mouse) however under “Devices” in Bluetooth System Preferences the following is displayed:

    Device Name: BT510

    Device Address: 00-c0-df-6c-58-93
    Device Type: Peripheral
    Device Services: BLUETAKE Bluetooth Mouse

    Paired: No
    Configured: Yes
    Favorite: No
    Connected: Yes

    It seems that there is no pairing success.

    I tried contacting “Bluetake” in Hong Kong (I am living in Hong Kong) but seems they never care replying!

    I suspect a software/hardware non compatibilty somehow. Any other such reports?

    Thank you

  4. This is the dopest f****** mouse I’ve ever had and, I’ve had a lot. I’ve been searching for a decent Bluetooth mouse for years and, I’ve finally found it. I had the Kensington pocketmouse bluetooth, Epox bluetooth mouse, IOGEAR Wireless Bluetooth Mini Mouse, Kensington PilotMouse Bluetooth, Logitech MX900 Bluetooth Optical Mouse, and even the Bluetake BT500. I sold every one because they sucked so bad. I suppose it was due to interference since Bluetooth 1.1 can’t handle that well that caused the mice to be so erractic. Not to mention not very responsive. But, I just got a new Acer F4000 notebook wich has bluetooth 1.2 built-in. And, they include a Bluetooth mouse wich I found worked much better than the ones I had before. I found out it was actually made by HP. But, the problem with it is that it’s huge. Not very practical for a laptop mouse. And, it didn’t slide very smoothly on anything but the very slickest mouse pad. Enter the Bluetake BT510. None of the pictures I’ve seen even begin to do it justice. Especially the ones on Bluetake’s site. They make it look like the mouse is *flat* black. Not so. It’s a very glossy black and, it looks beautiful. Also, you can’t really see the shape of the mouse in the pictures. In person, the shape is downright awesome. Besides the aesthetics, this mouse is perfect. It has an on/off switch which is a nice feature that a lot of wireless mice don’t have especially the older ones. It’s nice and compact which is good for travelling with your notebook. But, unlike some other mice like the IOGear bluetooth, it’s not too small. It feels great in your hand. Very comfortable. Even the scroll wheel feels just right unlike many other mice. Also, unlike the giant HP mouse that came with my notebook, it’s very slick on the bottom. It slides smooth on any surface. Last but not least, it’s one of the very few Bluetooth mice that I’ve been able to find that support Bluetooth 1.2. The only other one I found was the Targus one which I’ve ordered but haven’t received yet. It looks ugly as sin in the pictures though. However, I ordered the Toshiba OEM one which looks a little better since it’s in Black and silver. Anyway, with the Bluetooth 1.2, the BT510 works perfectly. No delays or erratic behavior. Oh, and one more thing, it has a switch left/right buttons feature which for me being left hand is a godsend. It’s much better to be able to change it hardware wise than using the mouse control panel. The reason is that the control panel peferences generally affect all mice. This is an annoyance when you use multiple mice especially one on the left and one on the right which I do often. So, if you change the buttons on one mouse in the control panel, it screws up the other mouse that’s on the other side. Don’t listen to what this other guy said about Linux. The hp mouse that came with my notebook was automatically recognized and configures by SuSE 9.3. It just worked. I expect there will be no difference with this mouse. I realize it’s not always that easy to set up a bluetooth mouse in Linux. But, my example shows that it can be. Buy this mouse, you won’t regret it!!! Of course, the one other advantage is that, if you have built-in bluetooth you don’t need a dongle to use it. This is a huge advantage over RF mice. PS – This mouse matches my black Acer F4000 notebook perfectly.

  5. I’m using this with my linux lappie, works brilliantly! No erratic movement like another bt mouse I had. Easy to set up too, I just followed these instructions.

  6. After reading your review I agreed that it is a pity the enclosed USB power cable doesn’t allow recharging rechargeable batteries.
    So I wrote to Radtech suggesting that they allow this in a future version.
    They replied:
    “Actually, this functionality is already there Herve. If you install NiMH cells into the 510, the USB power cable will trickle-charge the cells.
    We chose to not advertise this fact in the event people would attempt to charge non-rechargeable batteries, which may heat up and swell.”
    I checked in the product instructions available here and yes it is documented.
    This is great news because as far as I know, this feature makes the BT510 the first BT mouse that can be recharged without using a bulky adaptor, right from the computer itself.
    Julie: May I suggest this be corrected in the review, as it makes a great difference in the product features list?
    blasjw: can you try this if you have rechargeable batteries at hand and let us know?

    Herve

Leave a Comment

Your email address will not be published. Required fields are marked *