Surplus PDA Sony CLIE TH55 Face Plates Review

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

Product Requirements:
Device:
Sony CLIE TH55

The Sony CLIE TH55 hasn’t been out very long at all, and already we have several options to customize it. From leather cases, to plastic plugs that fill the voids left at the top of the CLIE when the flip cover is removed. Another way to customize your TH55, is with a replacement flip cover. This review will take a look at the colored face plates that are being sold by Surplus PDA.

th55face4 th55face5

Made of semi-transparent plastic, these plates are available in blue, green, red and white. The plastic material has a luminous quality to it, that gives a person the impression that they might glow in the dark. FYI: they do! That is, if you prime them by placing them under a bright light for several minutes.

th55face1

The plastic that is used for these plates does not have a mirror finish like the original flip cover. That’s a good thing if finger prints and smudges drive you as crazy as they do me.

When you purchase a face plate, you also get 2 screws and a special screw driver that will be needed to remove the original face plate from your CLIE. In case you haven’t noticed, special screws are used to hold the plate on to the hinge. It sort of makes you wonder if Sony did this on purpose, so that people wouldn’t try to remove them. I guess they had the right idea, because when I tried to remove the original screws from my TH55, the included screw driver tool stripped them out! As a result, I can’t show you what this product looks like when it is installed. :o( I’m not very happy…

th55face2 th55face3
Left to right: Stripped screw, worn screw driver tip

I would approach this product warily… I don’t know if I just had a case of bad luck, if the included screw driver had too soft of a tip, if the screws in my original TH face plate were over tightened, or what… Regardless, it’s left a bad taste in my mouth.

 

Price: $19.95

Pros:

Several colors to choose from
Includes screws and tool
 

Cons:
I was not able to remove my original face plate with the included tool. My screws were stripped.  

 

Product Information

Price:19.95
Manufacturer:Surplus PDA
Pros:
  • Several colors to choose from
  • Includes screws and tool
  •  
Cons:
  • I was not able to remove my original face plate with the included tool. My screws were stripped.  

15 thoughts on “Surplus PDA Sony CLIE TH55 Face Plates Review”




  1. Gadgeteer Comment Policy - Please read before commenting
  2. I’m not really interested in a plastic cover, but because of the size and color of the TH55, I think someone should made a perforated brass cover (ala Star Trek communicator from the original 60’s series). Then if it would just chirp / beep when flipped open 😎

  3. Julie,

    I am a first poster and am not sure if this belongs here or not. However, with the fate of your face plate screws, I wanted to at least let you know there could be an quick fix for your problem.

    There is a special screwdriver made to remove safety, or “one way” screws (like the ones you see holding the bathroom stalls together) and they also work great for removing stripped screws as well. See the link below for a picture.

    I used to work in a hardware store and know these are readily available. However, most locksmiths keep them in their toolboxes, so perhaps you could take your trusty Sony to your local lock guy and he could remove the screws for you.

    Hope this helps.

    – Jeff

    http://www.shifflerequip.com/detail.phtml?cat_id=10&subcat_id=148&subsubcat_id=289&product_id=19737

  4. You aren’t alone. One of my screws was stripped by the screwdriver as well. I now have a faceplate I can’t use. I even tried removing the cover as per Sony’s instructions with the bracket intact and no way could I get that one darned screw out. I added a couple of scratches to my faceplate trying. I just put it back together and will keep it as is until a better solution comes along.

  5. sdkat2:

    I hope you don’t take this the wrong way, but I’m glad I’m not the only one that this happened to… Only because I don’t like giving a bad review to a product if it doesn’t deserve a bad review. Sounds like I was right on the mark with this one though… :rolleyes:

  6. Ladies:

    Please stay away from the TH55s.

    First Judie gets one and manages to break the digitizer safely inside the first two weeks of ownership. (Okay, IT broke, maybe she DIDN’T do it, but nonetheless it DID break, somehow.)

    Then Julie gets one and manages to strip the faceplate screws attempting to ‘improve’ on a fairly good design. (In this case, the blame CLEARLY rests with the screwdriver, and not the Gadgeteer correctly operating the screwdriver.) Yeah, I know those faceplate fingerprints can be ANNOYING. But I’m certain they’re less annoying than staring at a STRIPPED screw on the finger-print laden faceplate.

    (Julie, you’ll end up with a refreb assuming you can pass the blame back to Sony for making a strippable screw.)

    My free advise:

    Julie – go back to the Palm III. Faceplate easily snaps on and off, no need for potential faceplate damaging screw drivers.

    Judie – use a softer stylus – like a q-tip – and the digitizer may last a bit longer. And if it DOES break again – quickly pack it back in the box and RETURN it for a REFUND – then get a new one with a fresh digitizer 🙂

    Great luck!
    drew

    ps. Just taking a fun jab girls – have a great weekend!

  7. drewgolden:

    I’ve got a better idea, I’ll just take off the flip cover and fill in the gaps with the plugs I received from
    http://www.glblsrc.com

    BTW: if you want these plugs, you can get free shipping if you use the code: the-gadgeteer

    The code expires on 4/30.

  8. Originally posted by drewgolden
    Judie – use a softer stylus – like a q-tip – and the digitizer may last a bit longer. And if it DOES break again – quickly pack it back in the box and RETURN it for a REFUND – then get a new one with a fresh digitizer 🙂

    I thought about using a q-tip, but it is so much more fun to use my sterling silver bolt stylus with my Zodiac2. No need to baby that PDA. Plus it is nice to have a stylus that doesn’t cramp your hand in the first five minutes of use! 😉

  9. Originally posted by Julie
    [B]drewgolden:

    I’ve got a better idea, I’ll just take off the flip cover and fill in the gaps with the plugs I received from
    http://www.glblsrc.com

    BTW: if you want these plugs, you can get free shipping if you use the code: the-gadgeteer

    The code expires on 4/30. [/B]

    I really like those plugs. After I removed the cover to continue in my effort to get the stripped screw out I decided to try the plugs I ordered from GlobalSource a few weeks back. I kept the plugs in for a day but it sort of felt “naked” even though it was in the Brando case so I put the faceplate back on. I think with the right case, such as a slim Vaja or Sena I would leave them in to make the TH55 more pocketable. I’m anxiously awaiting case releases from these two companies to see if they tailor them to the TH55 without the faceplate.

  10. JoAnn:

    It’s hard to tell from the pictures if these little screw drivers would actually work in the strange screw head that Sony chose to use. The ones you link to, look like they have a star pattern to them. Am I missing something?

    On another note, are you a guitar player? Just curious because of the link to Stewart MacDonald.
    🙂

  11. The star pattern will serve the same purpose as the two round bosses on the screwdrivers I’m familiar with. As you push down on the handle, the points of the star “bite” into the marred screwhead, preventing the slippage that caused the problem in the first place.

    I haven’t seen those little suckers before. Might have to get some for myself!

    – Jeff

  12. Jeff is right, the points are actually fairly sharp and are harder steel than most screws. (Yes, I used to do a bit of guitar repair – StewMac is a good source for those specialty tools one can’t make oneself!)

Leave a Reply to drewgolden Cancel Reply

Your email address will not be published. Required fields are marked *