REVIEW – Having reviewed several dash cams over the last year or so, I wanted to review the Z-Edge Z3D dash cam mainly because it had a remotely mounted rear cam.
What is it?
The Z-Edge Z3D Dual Lens Dash Cam is, as it sounds, a dashcam with two cameras. What makes this dash cam different than some of the other dual-camera dash cams is that its second camera is able to be remotely mounted and it includes a GPS feature.
What’s in the box?
List contents – you can remove this heading and section if it doesn’t apply to your review.
- Car Dash Cam
- Rear camera
- Car mount with built-in GPS
- Dual Car Charger
- Short Micro USB charging cable
- Long Micro USB charging cable
- Mini USB cable for rear camera
- Cable clips
- Wire cable tool
Design and features
The Z-Edge Z3D is a dual-lens dash cam that can record in Full HD (1920x1080p) at 30fps when using both cameras, and 2560×1440 at 30fps when using only the front camera. Both cameras have a 150-degree wide-angle view. The front camera (the main unit) has a mount that includes a GPS antenna, something not normally seen in a dashcam. The cameras also utilize Wide Dynamic Range (WDR) technology that compensates for light/dark spots and balances the exposure. The mount holds very securely and is a bit easier to install than most other suction cup mounts. The rear camera uses 3M tape to mount to the window.
The included 26 foot Micro USB cable for the rear camera is long enough to reach the rear of just about any passenger vehicle. I was able to route mine all the way to the back of my pickup truck topper. It even works rather nicely through the tinted rear window.
The Z-Edge Z3D is also capable of using an SD memory card up to 128GB, most other dash cams only support up to 64GB. When used with a 128GB card the recording time is approximately 720 minutes or approximately 45 minutes for every 8GB of storage.
Like almost every dash cam, the G-Sensor automatically protects video clips as an “Emergency File” when it detects a collision or vibration to protect them from being overwritten as the device records in a loop, overwriting the oldest files when the card is full.
The parking monitor feature allows the device to monitor the vehicle even when the engine is switched off using its built-in battery. If any vibration is detected by the G-Sensor, it will automatically turn on the dash cam and begin recording. Approximately 30 seconds after the vibration has finished, the device will automatically turn off and return to monitoring mode.
The 2.7″ LCD screen is large enough to easily operate the camera.
The GPS function saves the location data to a *.map file that can be used with the Z-Edge desktop software to display the location, speed, and route on Google Maps. At first, I thought this was an odd feature, but after opening the video file in the viewer I found it to be pretty neat. It displays the current time, latitude, longitude, current speed, max speed, average speed, total distance, and location on Google Maps and it updates as the video is played.
Sample Video:
What I like
- Rear Camera
- Dual Car Charger so you’ll still be able to charge something else
- GPS Feature
What I’d change
- Would like a dedicated save button for protecting files
Final thoughts
Overall this is a pretty nice dash cam. I think it will be my main dash cam for a while as it has all of the features I want.
Price: $139.99
Where to buy: Amazon
Source: The sample of this product was provided by Z-Edge.
Gadgeteer Comment Policy - Please read before commenting
Great review! I was wondering what the video is like after dark? Also I assume you can swap out SD cards if you wish to preserve a recording that didn’t involve an incident that would cause the camera to not overwrite the footage. Also my truck is parked outside a lot. How easy is to disconnect and store out of sight. Thanks again for the great review.
Brad
The night time video is excellent, I should have included that in the video. You can swap out the card while the unit is on, I actually forgot to put the card in once and just put in another and it was able to format it and start recording. However, if you use a good-sized card you’ll have plenty of hours before the footage is overwritten. The unit is easy to remove. You can either use the suction cup mount or simply side the unit sideways to remove it from the mount.
No problem about the night video. How hard was it to install particularly the rear camera. I like my wires hidden as much as possible.
Brad
Mine wasn’t that fun to install, but only because I ran it out of the cab of my truck, all the way to the back, and then inside the truck topper. It will really depend on where you’re installing it and what your vehicle is like.
Brad, when you are recording, you should be able to press the menu button on it and it will lock the current video file. This will prevent it from being recorded over when it loops back around and starts recording over old files
unable to store correct time.