NewscrowdfundingEDC

This pocket wrench locks onto the bolt, then spins like a fidget toy when the work is done

GripX by AURA multifunctional wrench holding a brick with its locking jaws
If you buy something from a link in this article, we may earn a commission. Learn more

GripX packs pliers, an adjustable wrench, a wire cutter and a hex bit driver into one pocket frame, then adds a fidget spinner for idle minutes. AURA launched the campaign on November 14, and it’s already past $8,700 from 152 backers.

The shape gives the idea away early. Two serrated jaws sit at the front of the frame, a knurled thumbwheel rides along the spine, and the red spinner hub caps the pivot.

It’s a desk-toy silhouette with a workbench job description, and that mix explains the early backer count better than any single spec on the page.



GripX by AURA, Stainless Steel
7-in-1 pocket multitool · Locking pliers, adjustable wrench, wire cutter, hex bit driver and a fidget spinner built into the pivot
Price: $42 Super Early Bird
Where to buy: Back on Kickstarter

Jaws that set once and hold their bite

The jaws do the wrench work. AURA built them with a crocodile in mind, all serrated teeth and a hinge that lets the mouth open to a 30-degree angle for odd-shaped hardware, pipe and bent brackets.

Set the screw, squeeze, and the bite repeats at the same size until the screw gets moved again.

GripX by AURA wrench in use on motorcycle bolts and fittings

A threaded screw runs through the frame, so the jaw size gets set once and stays put while the tool works down a row of matching nuts. That saves the constant squeeze-and-slip routine that makes small pliers tiring on repetitive jobs around the house.




The campaign aims it at the jobs that actually fill a week: a loose bike bolt on the trail, a wobbly caster at home, skate hardware that needs a quarter turn before the next session. A drawer pull that wiggles every time the drawer opens joins the list too.

It clamps the work down so both hands stay free

Locked down, GripX works as a small bench clamp. A workpiece stays pinned for sanding, cutting or drilling, and nobody has to stand there squeezing the handles to keep it from skating across the bench.

GripX by AURA clamping a wooden disc while a rotary tool sands it

In the campaign photos it holds a wood disc steady under a rotary tool, jaws locked, hands clear of the bit.

AURA’s demo shots hang a brick from the locked jaws by a cord, which is a neat party trick and a fair picture of how the clamp hold earns trust.




A wire cutter and a bit driver share the frame

A cutter sits in the jaw base, ready for wire and thin metal stock. The hex holder takes standard bits, and the frame’s T-handle shape lets a user lean on a stubborn screw with real torque instead of fingertip pressure.

GripX by AURA built-in wire cutter trimming a thin wire

Bits swap in seconds. AURA sells a five-bit kit as an add-on, alongside a leather sheath, a carabiner with lanyard, a lanyard bead and a spare parts kit.

GripX by AURA with a Phillips bit mounted in its hex bit holder

The trade-off is leverage. A cutter built into a pocket frame trims wire cleanly, but it won’t chew through heavy cable the way a dedicated pair of snips does, and the bit driver shares that same plain limit on thick stock.

The spinner earns its place on the pivot

Plenty of multitools hide a fidget trick somewhere. GripX puts its spinner on the pivot, a red disc that spins freely when the jaws are parked and gives restless hands a job.




GripX by AURA fidget spinner hub spinning on the pivot

It sounds like a toy until a long call runs long, and then it makes sense.

The disc sits on the pivot bolt, so the spin comes from the same hardware that holds the jaws together, not from a glued-on extra.

Titanium if you count grams, stainless if you count dollars

Two builds share the same design. The titanium alloy version weighs 84.9 grams (2.99 ounces), and the stainless steel version weighs 127.6 grams (4.50 ounces), with black and silver finishes offered across the line.

Silver suits the workshop bench and black suits the pocket, though the metal changes the carry more than the finish does.




GripX by AURA in black and silver on a workbench with screws and bits

The weight gap frames the choice. Titanium disappears into a pocket and forgets the toolbox exists, while stainless trades a little heft for a much lower pledge, and both keep the same jaws, cutter and spinner.

Pledges, shipping and the December 5 deadline

Stainless pledges start at $42 for the Super Early Bird single, with an Early Bird at $45, a two-pack at $84 and a three-pack at $118 on the maker’s rewards chart. Shipping adds $9 in the US for a single tool, and the campaign lists the same $9 across Europe, Australia and Asia.

AURA set the $1,000 goal low, backers cleared it on the first day, and the count has kept climbing since.

The campaign page leans on factory photos and a full demo video, and the Risks section sits where it always sits, so the usual crowdfunding caution applies before the card comes out of the wallet.




As of tonight the campaign sits at $8,726 pledged from 152 backers against a $1,000 goal, with the clock running to December 5 at 7:31 AM Central. Titanium tier pricing sits on the campaign page beside the stainless chart, and AURA takes pledges until that deadline whether the total moves or not. Every pledge also unlocks the add-on shelf at checkout.

The funding question is settled, and the only question left is which build to carry.

GripX by AURA, Stainless Steel two-pack
Two 7-in-1 pocket multitools · One for the bench, one for the bag
Price: $84 Super Early Bird two-pack
Where to buy: Back on Kickstarter

Backers eyeing the titanium build have until December 5, when the campaign closes and the early-bird pricing goes with it.






Leave a Reply

Your email address will not be published. Required fields are marked *