NewsEDCfolding knife

M390, titanium and carbon fiber with no brand tax

M390 flipper folding knife with titanium frame and carbon-fiber inlay, open on tan cloth
If you buy something from a link in this article, we may earn a commission. Learn more

An M390 blade, a TC4 titanium frame and carbon-fiber inlays machined into the handle scales add up to a recipe that usually costs real money. Then notice what’s missing. There isn’t a brand name anywhere on it, on the blade or the listing.

No logo rides on the blade, no maker page stands behind the listing and no brand rep will ever answer an email about it. That absence is how this flipper lands at $129.99 on Amazon.

M390 Flipper Folding Knife
M390 powder-metallurgy blade, TC4 titanium frame with carbon-fiber inlays, 3.75-inch drop point
Price: $129.99 (a 5 percent coupon is showing on the listing)
Where to buy: Buy on Amazon



M390 earns the headline spot on the materials sheet, since it’s a powder-metallurgy tool steel built to hold an edge through weeks of cardboard, rope, camp wood and warehouse work in between, day after day. Our recent knife steel comparison kept circling back to it whenever the conversation turned to edge retention over outright toughness.

The listing says the blade leaves the factory ground to a symmetrical edge and pre-sharpened, so the first cut is the maker’s edge rather than a sharpening project, and plenty of budget blades can’t say that. Powder metallurgy gives the steel its fine, even carbide structure, and that’s the quiet reason it outlasts cast steels at this price.

Sharpening M390 takes patience and a decent stone, since the same carbides that hold the edge also resist grinding it back. Diamond plates make the job quicker. That’s the standard trade at this level of steel, and anyone stepping up from budget blades should expect it, though once it’s sharp it stays that way through weeks of ordinary work.

A 3.75-inch drop point with room to work

Blade length runs 3.75 inches in a drop point profile with a flat edge, and the whole knife stretches to 8.5 inches with the blade swung open and locked. A long slot milled through the flat behind the edge trims a little weight out of the blade and gives the profile its distinctive, unmistakable line from across the room.




M390 flipper folding knife open in full view on tan cloth, showing the drop point blade and carbon-fiber inlay

Nothing about the shape is exotic, and a drop point this size handles food prep, feather sticks and package duty without asking you to think about which stretch of edge belongs to which job or grip. A small choil ahead of the handle leaves room for a pinch grip on fine, controlled cuts.

The tip rides low enough for controlled cuts, while the flat edge keeps the full length working instead of saving the belly, and the geometry stays plain working geometry. No gimmicks in the grind. The matte gray finish hides the scratches a working knife collects, which suits a blade bought to be used rather than displayed. It also keeps glare down in the field, a small thing hunters and anglers tend to appreciate.

Titanium does the frame, carbon fiber does the grip

TC4 titanium forms the frame, precision machined, with carbon-fiber inlays set into the scales. A textured finish carries across the whole handle for grip.




Titanium keeps the structure stiff without the heft of a steel frame, and the texture works when hands are wet, cold or gloved, because grip security was clearly a design input here, not an afterthought. The inlay sits flush in the scale, with no lip to catch a thumbnail.

Close view of the M390 flipper's spine, machined titanium bolster and carbon-fiber inlay

Contours fill a palm rather than perch in it, which sounds minor until the twentieth cut of the day is done, and squared-off scales announce themselves fast. This handle is shaped like a tool first, and the material showcase only starts if somebody asks what the scales are. The weave catches light the way carbon fiber does, shifting from gray to silver as the knife turns slowly in the hand under a lamp.

M390 flipper closed, showing the carbon-fiber inlay weave and titanium pocket clip




Tuned to flip, built to lock up

Deployment runs through a flipper tab with machined jimping along its spine, so an index finger gets real purchase instead of skating off a smooth nub of polished steel. The listing says the action leaves the factory already tuned, with a solid lockup, no blade play in any direction and nothing to adjust, tighten or break in before the first carry. The tab’s jimping is cut deep enough to bite a fingertip, not just suggest that it might.

The listing never names the lock. I won’t guess at one from photographs, because plenty of sellers dress up an ordinary mechanism with a trademarked name and this one skips that game entirely. Judge it by the lockup claim instead.

Close view of the M390 flipper's pivot, flipper tab and lockup

Where it earns its keep

Recommended uses on the listing run to bushcrafting, camping, fishing, hiking and hunting, which is a wide net for any 3.75-inch folder to cast. It disappears between jobs.




In the hand it lands in the sweet spot for a primary pocket knife, big enough to run a campsite kitchen, break down boxes by the dozen and still slim enough to ride a pocket seam all day. Few folders at this price carry this big this quietly or this flat.

M390 flipper closed in hand, showing the carbon-fiber inlay and titanium bolster

Once open, the flipper tab forms a small guard in front of the fingers, keeping a wet hand off the edge. A milled titanium clip does the carrying, and care runs to hand wash only, which is standard for a steel worth keeping keen over the long haul. Hand washing takes a minute at the sink.

Closed, the profile stays thin enough to forget between uses, riding flat against the pocket instead of bulking it out or catching on the seam. In the photos the clip mounts high on the frame. That’s the carry test a daily knife either passes quietly or fails daily, and a high clip mount is where a deep ride starts.




The catch, stated plainly

There’s no brand behind this knife, no maker page to cross-check, no published weight and no hardness figure to verify before the money moves. No warranty desk stands behind it, either.

M390 flipper closed seen from the spine, showing the layered titanium and carbon-fiber frame

What comes back the other way is the recipe itself, M390 and titanium and carbon fiber in one folder at a price branded versions never touch. For a buyer who shops steels and handle materials instead of logos, that trade settles itself. Amazon’s listing is the storefront here, so the photos, spec table and claims are what you get, and they’re unusually complete for an unbranded knife. Read them the way you’d read a spec sheet, with the gaps noted.

M390 Flipper Folding Knife
M390 powder-metallurgy blade, TC4 titanium frame with carbon-fiber inlays, 3.75-inch drop point
Price: $129.99 (a 5 percent coupon is showing on the listing)
Where to buy: Buy on Amazon




If the materials are what you shop for, this is the cleanest route into them I’ve seen at this price all season. Trusting the listing over a logo is priced fairly here, coupon and all.



Leave a Reply

Your email address will not be published. Required fields are marked *