Opening a package in a dark garage usually means reaching for two tools: a flashlight and a utility knife. NITECORE’s UTL19 puts both in one metal body, then adds a UV light, a green laser, and a glass breaker.
Price: €129.95 (about $145)
Where to Buy: Nitecore
There’s a lot packed into this tool, but the combination makes the most sense when you regularly cut materials, inspect equipment, or work in poorly lit spaces.
Can a pocket flashlight really replace your box cutter?
For deliveries, tape, and cardboard, yes. NITECORE includes a replaceable blade that slides out of the side of the housing, and you install it yourself before first use.
A slider extends and retracts the blade, while a separate switch locks and unlocks it. The cutting and lighting controls work independently, so you can light your work area with the blade still tucked away. When the edge dulls, you swap the blade instead of the whole tool. A lanyard and USB-C cable come in the box.
A dedicated knife is still the better choice when you need a longer edge or a different blade shape. If most of your cutting is deliveries and small jobs, this one covers it with a light close at hand.
Do you really need three beam patterns in one light?
If you switch between close-up work and checking something down a hallway, yes. The white light runs floodlight, spotlight, and mixed light, and floodlight reaches 1,800 lumens with a 180-meter throw.
Spotlight delivers 800 lumens and reaches 220 meters. Mixed light produces up to 1,200 lumens and 200 meters, combining wider coverage with a focused center.
Floodlight runs 1 hour and 15 minutes on high, 9 hours at 80 lumens, and 270 hours at the 1-lumen ultralow setting. Temperature regulation steps the output down to control heat.
What can UV light and a green laser show you that white light can’t?
Fluorescent traces you’d otherwise miss, plus a precise point you can aim across a worksite. The UV light runs at 365 to 375 nanometers, with 200, 600, and 1,350 milliwatt levels for leak detection, document checks, and hygiene inspection.
The green laser has three levels, topping out below 5mW, at 510 to 530 nanometers, and Nitecore lists it as Class 3R. A long press of the M button jumps straight to it, while short presses switch between light sources. The UV light is rated Risk Group 1 (low risk) under IEC 62471. For ordinary package opening and occasional lighting, they’re extras you probably won’t use often.
Will it hold up riding in your pocket every day?
It’s built for it. Aluminum alloy and stainless steel form the housing, with IP67 dust and water protection and impact resistance to a 1-meter drop.
It measures 5.08 inches long, 1.54 inches wide, and 1.06 inches thick, and weighs 5.22 ounces without the accessories. A stainless steel clip holds it on a pocket, belt, or bag strap. A built-in 1,500mAh battery powers the lights, with indicators showing the remaining charge. A full USB-C charge takes about 75 minutes on a 5V/2A adapter.
The glow locator helps you find it in the dark: an ultra-low-power UV source makes fluorescent material on the housing glow faintly, with roughly two years of standby when it’s on. A stainless steel strike bezel with silicon nitride ceramic tips doubles as a glass breaker for emergencies.
If keeping pocket weight down is your priority, a smaller flashlight is the easier choice.
Is it worth carrying one tool instead of two?
If you open packages and work in dim spaces most days, yes. The blade and adjustable white light give it its strongest everyday purpose, while the UV light, laser, and glass breaker only earn their place if your work calls for them.
If you’d rather order from Amazon now, Nitecore’s EDC17 skips the blade but carries white, UV, and green light in a flat stainless steel body.
Price: $94.95
Where to Buy: Amazon
If you only need a flashlight and an occasional box cutter, buying those separately makes more sense.
Price: €129.95 (about $145)
Where to Buy: Nitecore
For anyone who cuts, inspects, and works in the dark on the same day, it’s a practical one-pocket kit.
