DealsBlack Friday 2026sonos

The Sonos Beam Gen 2 just hit its lowest price yet for Black Friday

Sonos Beam Gen 2 in black under a TV on a wooden console
If you buy something from a link in this article, we may earn a commission. Learn more

The Sonos Beam (Gen 2) is down to $339 for Black Friday, and that’s the lowest price this compact Atmos soundbar has carried since it launched. Sonos rarely discounts its soundbars, so a $160 cut lands differently here. Sonos almost never does this.

The bar measures 25.63 inches wide, 2.72 inches tall and 3.94 inches deep, and it weighs 6.2 pounds, so it sits under most TVs without blocking the bottom of the screen. That footprint suits smaller rooms and secondary TVs, where a full width bar crowds the console and a separate subwoofer has nowhere sensible to go. It comes in black or white with a matte finish. The black version carries this price at Amazon.

Sonos Beam Gen 2 in black on a wooden console at night

Price: $339 (save $160, 32% off)
Where to buy: Buy on Amazon

Sonos held this bar at $499 for most of its life, and even its sale prices usually stopped well above this level in earlier seasons. A $160 cut is 32% off, and it puts the Beam within reach of bars that don’t carry the Sonos app, the tuning tools or the upgrade path. That’s why this one stands out in a crowded week of soundbar discounts.

Atmos from a bar with no up-firing drivers

Five Class-D amplifiers drive one center tweeter and four elliptical midwoofers, and three passive radiators handle the low end, so the bar builds its bass without a separate box on the floor. A processor that’s 40% faster than the first generation chip creates two new audio paths, and those paths place phantom height channels above the listener for Dolby Atmos content. The height effect is virtual, though. It isn’t the same as sound bouncing off the ceiling from drivers aimed straight up, and that trade sits at the center of this bar.

Full quality Atmos needs an HDMI eARC connection, because Dolby TrueHD and multichannel PCM only pass through that port, and the bar also handles Dolby Digital Plus, Dolby Digital and stereo PCM. DTS Digital Surround is on the format list as well, and the Sonos app shows which format the bar is decoding while a movie plays. A TV without eARC still connects over ARC, though the higher formats need the eARC port to pass at full quality.

Sonos Beam Gen 2 in black from the front on a console

The precisely perforated grille replaced the fabric of the first generation, and it shrugs off dust better while the bar sits out in the open on a console. The matte finish keeps reflections down under the screen, and the bar can also hang on a wall with an optional mount. Dust wipes off in one pass. That helps in a living room where the bar sits in daylight all day, catching every dust line and fingerprint that a fabric wrap would hide until the whole front looked tired and gray.

Dialogue stays clear when the room gets loud

Speech Enhancement boosts the voice frequencies in the app, and Sonos had Oscar-winning sound engineers help tune the bar so whispered lines stay intelligible when the action around them gets busy. Night Sound pulls the loud effects down and lifts the quiet ones, so a late movie doesn’t wake the house while the dialogue still carries across the room. Dialogue is the upgrade most people notice first.

A hand using the touch controls on a Sonos Beam Gen 2

Trueplay tuning reads the room through an iOS device and adjusts the bar’s EQ to the space, and the app also handles bass, treble and loudness on its own sliders. A far-field microphone array with beamforming handles voice control through Alexa or Google Assistant, and touch controls on the top panel cover volume and playback without a phone. Setup takes two cables. The step-by-step guidance runs inside the Sonos app, and the bar is playing TV sound within minutes of coming out of the box.

It grows into a full system over time

A Sonos Beam in white with rear speakers in a living room

The Beam works on its own, though it also pairs wirelessly with a Sonos subwoofer and two rear speakers when a room outgrows a single bar, and every piece connects through the same app. TV Audio Swap sends the sound from the bar to Sonos Ace headphones for private listening, and that handoff is handy when someone else in the house is asleep. The bar still works alone. Music streaming runs through the app and AirPlay 2, including Dolby Atmos Music.

An Ethernet port sits on the back for a hardwired connection, and Wi-Fi carries the streaming side when a cable run isn’t practical in the room. A wired link never drops. The bar syncs with the TV remote through its infrared receiver, so daily volume control stays on the remote that’s already on the couch, with no second remote joining the pile on the armrest.

Buy the Beam (Gen 2) at $339 if your TV sound is thin and your console is small, because this is the cheapest entry into the Sonos system that still does Atmos. Skip it if your room needs real ceiling bounce or a subwoofer in the box, since neither comes with this bar at any price. The price makes the call.

The sale runs through November 30 at Amazon and the Sonos store. Prices on this bar have a habit of snapping back to $499 once the window closes, and Sonos soundbars rarely sit this low for long once December starts, so the decision here is really about timing.



Leave a Reply

Your email address will not be published. Required fields are marked *