Buck made 80 of these, and then the run ends. The 791 Range Elite Miami Sunset takes the crossbar-lock Range platform and dresses it in a gradient titanium handle from Lynch NW, with a cobalt Cerakote MagnaCut blade up front.
Buck Knives 791 Range Pro Folding Pocket Knife
3.375-inch 154CM drop-point blade, glass-filled nylon handle, crossbar lock, ambidextrous thumbstuds
Price: $124.99
Where to buy: Buy on Amazon
Eighty knives is the whole production run
Eighty pieces isn’t a marketing run size, it’s a batch, and Buck lists the Miami Sunset under its Special Releases as a limited collection piece. Only 80 exist. The product page states the run plainly, only 80 were made, and Buck’s own description says the edition brings a little vice to its proven crossbar lock platform. When the batch sells through, the listing closes and the secondary market sets the next price.
That math explains the $450 tag better than the materials list does, and it explains the resale listings that will follow this launch. Scarcity is the product here, and Buck priced it like one, because a gradient titanium handle on a standard run would never carry this number or hold this resale line.

The handle comes from Lynch NW
The standard 791 Range Elite wears anodized aluminum scales, and the Miami Sunset swaps them for titanium worked by Lynch NW. The anodizing runs as a gradient, teal and blue at the pivot fading toward violet at the butt, with gold-toned hardware setting off the color shift across the pivot, the lock bar and every screw.
Buck describes it as durable strength with a comfortable feel in hand. The color does the talking. Lynch NW built its name on titanium pocket clips and machined knife hardware over years of small-batch work.
Buck outsourced the handle work to them. The gradient is this edition’s visual identity.

Cobalt Cerakote over BOS MagnaCut
The blade carries the standard Elite’s steel, a 3.375-inch MagnaCut drop point with Buck’s BOS heat treat behind it. Cobalt Cerakote coats the blade this time, a deep blue finish that Buck says adds surface protection built for the long road ahead of it, season after season. MagnaCut brings the edge retention, toughness and corrosion resistance the steel built its reputation on, and the BOS heat treat is Buck’s long-running recipe for getting the most out of a blade steel.
The tang stamp reads BOS MagnaCut. The coating also quiets the blade down visually against the bright handle. It’s a working finish, not a display treatment, and it earns its keep every time the knife goes back into a pocket full of keys and change.

The Range platform underneath stays familiar
Everything mechanical carries over from the Range platform, the line that brought Buck its first crossbar lock. It carries like the standard knife.
Ambidextrous thumbstuds work the blade open from either side, and the crossbar lock handles opening and closing with the same smooth, confident action Buck promises across the whole series, either hand, either direction. None of it changes for the limited run.
A deep-carry pocket clip keeps the knife low in the pocket so it never draws unwanted attention. The carry setup is unchanged from the standard Elite, which is the right call on a limited run. The Range family splits into Pro and Elite tiers, and we broke down the Range Pro pair in depth earlier this year.
Pro models run 154CM blades in glass-filled nylon handles, while Elites step up to MagnaCut and anodized aluminum at $224.99 for the full-size 791 and $214.99 for the smaller 790 beside it. The Miami Sunset keeps the Elite hardware and changes the handle material and the blade finish, then stops, because the hardware was never the part that needed changing.
That makes this edition a trim package, new clothes on proven hardware rather than a new platform or a new knife. Buck saves its experiments for runs like this one, and the Range line keeps widening while the Pro and Elite tiers stay in regular production underneath it, which keeps the working knives easy to find and replace. The price gap is wide enough that nobody cross-shops the two by accident.

Buck 791 Range Elite Knife, Miami Sunset limited edition
3.375-inch BOS heat-treated MagnaCut drop-point blade in cobalt Cerakote, Lynch NW gradient anodized titanium handle, crossbar lock, ambidextrous thumbstuds
Price: $450
Where to buy: Buy at Buck Knives
What the premium buys over the standard Elite: the standard 791 Range Elite lists at $224.99 on Buck’s own site with the same blade steel, the same lock and an anodized aluminum handle. Nothing about the cutting tool itself changes.
The Miami Sunset doubles that price, and the difference buys titanium scales with the Lynch NW gradient, the cobalt Cerakote blade finish and a hard ceiling of 80 pieces. That framing makes the decision plain for both audiences Buck is courting here.

The Range Pro is the value route into the same platform
Amazon doesn’t carry the Miami Sunset or any 791 Range Elite, so the maker route above is the only way at this edition. The 791 Range Pro shares the crossbar lock and the blade shape in 154CM steel with a glass-filled nylon handle, and it sells on Amazon right now at $124.99. Collectors get a special release capped at 80 pieces, and everyday carriers get a Range Elite that no second production run will dilute.

The gradient handle is the draw, and the window is the batch itself, because 80 pieces won’t take long to clear once word gets around the collector circles that chase Buck’s special releases. The math isn’t close. Anyone unmoved by the color shift loses nothing mechanically, since the standard Elite and the Range Pro carry the same lock and blade shape for far less money, today and every day after this batch is gone.