ComparisonEDCfolding knife

AUS-8 to M390: five knife steels that each make a different trade

M390 flipper folding knife with titanium frame and carbon fiber inlays open on tan cloth
If you buy something from a link in this article, we may earn a commission. Learn more

Five folding knives run from AUS-8 to M390, priced $39.99 to $129.99. The steel on the spec sheet decides how each blade holds an edge and how it behaves when the edge goes in daily use.

The trade running through this lineup is edge retention against everything else: toughness, corrosion resistance, sharpening effort and price. The budget steels give up edge life and buy simplicity, and the premium steels reverse that deal, though none of these five wins every side of it. Pick your side of the trade first.

AUS-8 in the Smith & Wesson Special Ops Mini

Smith and Wesson Special Ops Mini clipped to a tan vest

Price: $63.98
Where to buy: Buy on Amazon



The Special Ops Mini runs a 2-inch drop point in AUS-8, a stainless steel Smith & Wesson sells on ruggedness rather than edge numbers, and the listing never quotes a hardness figure. Around it sits a push-button automatic with a button lock, aluminum handle scales and a deep-carry pocket clip, at 4.75 inches overall.

That simplicity is the pitch: a small auto that opens fast, rides deep in a pocket and asks nothing exotic of a sharpener. Buyers who shop hardness numbers won’t find one here. The aluminum scales are cut for grip, per the listing, and a 2.75-inch handle needs exactly that.

AR-RPM9 in the CJRB Spud

CJRB Spud small folding knife with aluminum handle

Price: $39.99 (save $13.33; regular price $53.32, 25% off)
Where to buy: Buy on Amazon

The Spud is the cheapest knife in this group and the only one under $40, and its AR-RPM9 blade is CJRB’s own steel, rated at HRC 59-61 on the maker’s page. The knife is a 2.34-inch drop point flipper with a liner lock and an aluminum handle, and it weighs just 1.71 ounces with a full four-finger grip.




A detachable lanyard clip turns it into a neck knife, and the pocket clip covers fifth-pocket carry when the cord comes off. Small knife, serious hardness number. CJRB claims high strength and excellent edge retention for AR-RPM9, and the trade is blade size: 2.34 inches handles daily cutting and stops there.

Closed, the Spud measures 3.25 inches, and the flat aluminum handle keeps it pocket-friendly even with the clip on. It carries like a fifth-pocket knife, small enough to share space with a wallet and keys.

N690 in the Kizer Wharning

Kizer Wharning V3738BW4 with Vortex Micarta handle

Price: $79.98
Where to buy: Buy on Amazon

The Wharning is the cutter’s shape in this group: a 3.4-inch Wharncliffe with a straight edge, 3 millimeters thick and 30 millimeters wide, ground from N690 stainless. Kizer describes the steel as a practical balance of edge retention, toughness and corrosion resistance, and its stonewashed finish hides working scratches.




A button-operated liner lock and a thumb stud run the blade, and the contoured Vortex Micarta handle carries a front choil and spine jimping for detail work at 104.7 grams. It’s the one built for controlled slicing, not prying. At 7.76 inches overall, it’s a full-size folder that fills the hand.

CTS BD1N in the Spyderco Native Chief Lightweight

Spyderco Native Chief Lightweight folding knife

Price: $122
Where to buy: Buy on Amazon

The Native Chief Lightweight stretches the pattern to a 4.02-inch full-flat-ground blade in CTS BD1N, the biggest blade in this lineup by a wide margin. Its fiberglass-reinforced nylon scales carry Spyderco’s Bi-Directional Texturing, the Lightweight build cuts 21 percent of the standard model’s weight, and a four-position clip covers tip-up or tip-down carry on either side.

Spyderco’s Trademark Round Hole opens it one-handed, and the symmetrical build works for left- or right-handed users. Spyderco sells BD1N on the same balance the Kizer claims: edge retention with toughness and corrosion resistance, and the full-flat grind is what turns that balance into slicing ability. Second-priciest here at $122, thanks to its size.




M390 in the unbranded titanium flipper

M390 flipper spine and carbon fiber inlay detail

Price: $129.99
Where to buy: Buy on Amazon

The M390 knife is the unbranded one: a 3.75-inch drop point flipper in a TC4 titanium frame with carbon fiber inlays, sold under no maker’s name on its Amazon listing. Amazon calls M390 a high-performance powder-metallurgy tool steel, and the listing leans on the steel and the materials because there’s no brand story to sell. The steel is the brand here. The blade leaves the factory ground to a symmetrical edge and pre-sharpened, per the listing.

Deployment is a factory-tuned flipper with a solid lockup and no blade play, per the listing, and the contoured handle carries machined jimping on the flipper tab. At $129.99 it costs the most in this group, and it asks you to trust a spec sheet instead of a name.

Which steel earns your money

Kizer Wharning V3738BW4 closed on a wood surface, showing the Vortex Micarta handle scales

Buy the Spud at $39.99 if you want the most steel per dollar in a knife that disappears into a fifth pocket. Buy the Special Ops Mini at $63.98 if a push-button auto with a 2-inch blade fits your carry, and the Wharning at $79.98 if your cutting runs to controlled slicing on a straight edge.




The Native Chief Lightweight at $122 is the pick for buyers who want a full-size blade that still carries light. The M390 flipper at $129.99 is for the buyer who shops the steel column first and the brand column never. Nobody here wins everything.



Leave a Reply

Your email address will not be published. Required fields are marked *