DealsEDCfolding knife

S35VN and a crossbar lock at a budget folder price

WE Knife Banter 2 in green canvas Micarta open, showing the gray stonewashed drop point blade and crossbar lock
If you buy something from a link in this article, we may earn a commission. Learn more

The Banter 2 keeps the handle shape Ben Petersen drew for the first Banter and swaps the liner lock for a crossbar lock. The green canvas Micarta build is $101.25 at Amazon today, down from a $135.00 list price, and the blade is CPM S35VN.

WE Knife Banter 2 (Green Canvas Micarta, WE23075-3)
2.87-inch CPM S35VN drop point · crossbar lock · 2.57 oz
Price: $101.25 (list $135.00) (save $33.75, 25% off)
Where to buy: Buy on Amazon

The cut takes a quarter off a knife that already undercut its steel class, because S35VN folders with ceramic bearing pivots and titanium thumb studs usually sit forty to eighty dollars higher on the shelf.

The design brief shows in the details, from the nested stainless liners to the plain scale faces and the lanyard hole drilled through the butt end of the handle. Nothing on the handle sticks out past the scale faces, not the clip screws, not the lanyard tube, not the bar ends.

Two things decide a pocket knife at this price, the steel and the lock, and the Banter 2 spends on both while folders around it usually pick one. Black Friday pricing is doing the work here, because WE Knife sells this same build at $101.25 against the same $135.00 list in its own store, and Amazon is matching that number today rather than inventing a deeper one.

The lock changed, and the carry changed with it

The crossbar runs through both liners and works from either side of the handle. The knife opens on thumb studs and closes with the same push on the bar, so a left-handed carrier gets the same motion as a right-handed one.

WE builds the pivot as a caged ceramic ball bearing assembly, and the stainless clip mounts tip-up on either side over those liners. The bar ends sit proud of the scales on both sides, knurled where thumbs land.

The crossbar design also lets the blade drop shut on its bearings once the bar pulls back, which is the motion that made this lock style a pocket staple.

WE Knife Banter 2 closed, showing the green canvas Micarta handle and crossbar lock button

Closed, the knife runs 3.79 inches and weighs 2.57 ounces, lighter than the keys and lip balm sharing the same pocket on most days.

It disappears in a pocket.

S35VN carries the spec sheet

The blade is a 2.87-inch drop point in CPM S35VN at 59-61 HRC, ground flat with a gray stonewashed finish. Overall length lands at 6.66 inches, the handle thickness at 0.46 inches, and the canvas Micarta scales and back spacer share the same green finish.

WE Knife Banter 2 clip side view with the tip-up pocket clip and designer mark on the blade

The flat grind keeps the edge thin behind a 0.1-inch spine, a geometry built for slicing rather than prying. The gray stonewash hides the scratches a working blade picks up, and the finish runs over the spine and tang so the whole blade reads as one piece of metal. Petersen’s diamond mark is etched on the tang flat, small enough to miss until the light catches it.

This one is built to slice.

Blade length2.87 in
Overall length6.66 in
Closed length3.79 in
Blade steelCPM S35VN, 59-61 HRC
Blade finishGray stonewashed
HandleGreen canvas Micarta
LockCrossbar lock
PivotCaged ceramic ball bearing
ClipTip-up, left or right
Weight2.57 oz

Where the money went

The spec money went into the blade steel, the bearing pivot and the titanium hardware, and the savings show up in the simple scale machining rather than in anything a hand feels during a cut or a sharpening session.

WE Knife Banter 2 spine view showing the blade thickness and bronze thumb studs

The aluminum-handled versions of this knife share the same blade and lock, so the choice between them comes down to grip feel and pocket wear. Micarta shows scuffs as a soft polish, while anodized aluminum shows them as bright scratches. Canvas Micarta also grips harder as it gets damp, and it hides pocket wear better than smooth metal scales do.

Gift buyers get an easy read here, because the knife arrives in a zippered storage pouch with a cleaning cloth and stickers in the box. The pouch survives a junk drawer, and the cloth keeps the stonewash looking new. It’s the rare folder at this price that needs no upgrade pitch.

Micarta ages better in a pocket.

WE Knife Banter 2 (Green Canvas Micarta, WE23075-3)
Designed by Ben Petersen · flat grind drop point · stainless liners · zippered pouch included
Price: $101.25 (list $135.00) (save $33.75, 25% off)
Where to buy: Buy on Amazon

Buy the Banter 2 at $101.25 if you want S35VN and a crossbar lock in a 2.57-ounce carry. Take the Benchmade Bugout at $190.00 if a USA-made knife carries the day for you, and skip both if your cutting is box tape alone, because a $20 utility folder handles that job fine.



Leave a Reply

Your email address will not be published. Required fields are marked *