WESN Allman Titanium knife review

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

WESNAllman 00

REVIEW – Having a good knife handy is considered essential to the EDC (or Everyday Carry) items of most folks, and knives certainly qualify as gadgets, so we frequently take an interest in them here.  Our latest example is the WESN Allman knife.  With its slim profile, pocket clip, and wide blade, it packs a lot into a small space.  Having originated as a successfully crowdsourced Kickstarter project, it is now available via the WESN site. Let’s check it out!  Gadget on!

What is it?

The WESN Allman is slim a folding knife with a frame-locking, drop-point shaped, “flipper”-style deployment blade, Titanium frame/handles and pocket clip.

Hardware specs

  • S35vn steel blade
  • Ball-bearing pivot
  • Titanium-coated machine milled pocket clip
  • Flipper for fast deployment
  • Ergonomically-contoured grip
  • Keychain/lanyard hole
  • Titanium frame lock
  • Weight = 3.65 oz
  • Length closed = 3.8 in
  • Overall length open = 6.65 in
  • Blade length = 2.8 in
  • Width = 0.93 in (23.5 mm)a

What’s in the box?

WESNAllman 01

Let’s start with the packaging itself, seen in the two images above.  It’s a WESN-branded cardboard box with top and bottom halves and some type of wood shavings as its packing material.

WESNAllman 02

Inside the box were the items shown above and listed below:

  • WESN Allman knife
  • Cloth drawstring pouch
  • Use & Care Manual
  • WESN logo decal

Design and features

WESNAllman 03

The Allman was one of those products that immediately felt and looked high-quality right out of its box.  Its Titanium handles make it feel very solid and compact, plus the Titanium alloy’s grey color looks robust and slick.

WESNAllman 04

The WESN Allman features a Titanium machine milled pocket clip which is stout but low profile.

WESNAllman 07

The Allman’s blade is 2.75 inches long and its tip is wide with a serious curvature, with a shape that I can only describe as a short, wide, drop-point style tip.  It was very sharp right out of the box.

WESNAllman 08

The Allman’s handle is 3.5 inches long.  I was excited to try the Allman and immediately began playing around with it.  I was impressed with its solidly-designed pocket clip, a feature that I appreciate because I like to keep my EDC knife at the ready in my right front pants pocket.

WESNAllman 05

The Allman is not only small in footprint (length and width sense), it is also quite slim (in a thickness sense) owing largely to its Titanium handles, which is a material that is very strong and lightweight.  I especially liked this as it cuts down on the knife’s bulkiness, which helps make this a much more effective EDC knife for me because it doesn’t feel like it takes up as much space in my pocket although it is still a fairly large knife.

WESNAllman 09

The Allman utilizes tiny stainless steel Torx head screws to secure its frame together, as seen above.  While Torx drivers are not exactly easy to find, they are available, and I suppose if you had to disassemble the Allman, it could be done, although the WESN folks don’t recommend that you attempt to disassemble the Allman on your own, but rather let them take care of repairs.  Additionally, the Allman includes a through-hole in its frame that can be used to attach it to a keyring, a length of 550 paracord or other items that can be used to attach and secure it.

WESNAllman 10

As mentioned further above, Allman has a very solid and functional pocket clip.  Like the frame handles, the clip is secured with small Torx screws, so the clip could be removed if desired, though the clip is such a low-profile shape and size that I can’t see a reason to do so.

WESNAllman 11

I’m including several images of the Allman from various angles and positions to showcase its styling, but the images don’t really do it justice.

WESNAllman 12

WESNAllman 13

WESNAllman 14

WESNAllman 15

In the image above the Allman’s frame lock mechanism can be seen in its locked position.  Like most folding knives today, the frame lock is a feature that “locks out” the blade into a fixed position, thereby effectively turning it into a fixed blade knife and preventing the blad from closing accidentally.  The frame lock is disengaged by pressing it slightly outward, allowing the blade to be folded back into the frame.

WESNAllman 16

Allman’s blade is quite complex in its feature set.  For starters, it is made from S35vn steel.  Along the back of the blade is Harpoon Style Blade Spine that can act as a spot for the thumb or forefinger, giving more precise control when cutting.    I found the Allman’s blade to cut quite well for most everyday applications, such as opening boxes or letters, cutting loose threads and slicing fruit or other food at my desk at work.

WESNAllman 17

Additionally, the back of the Allman’s blade includes three spine jimping grooves, as seen above, which are a spot that the thumb or forefinger can further utilize to improve grip and control when cutting.

WESNAllman 20

Before we get into functionality, let’s check out the Allman’s size.  As seen in these photos, I would consider it a medium-sized folding knife; its handle has just enough length to fit well in my palm to fully wrap my hand around its grip, while not being so long that it takes up too much space in my pocket.WESNAllman 21

The Allman’s size allows me to carry a knife that is a bit larger than most of the “mini”-sized knives I’ve previously reviewed.  While smaller knives are great for when size is a premium consideration, for many folks, carrying a larger knife may be a necessity.  If this sounds like your situation, the Allman may be a good size for you.

WESNAllman 22

WESNAllman 23

WESNAllman 34

The Allman, however, is darn near perfect for me because of its small size.  If I want to toss it into the bottom of my pants pocket, no probs.  If I want to clip it to the edge of my pocket, this works too, but because of the location and design of its clip, it does tend to stick up out of my pocket a bit.  (For anyone curious, these are the Bluffworks Departure Travel Jeans that we previously reviewed.

WESNAllman 24

I measured the Allman to be just shy of 4 inches in length while closed.

WESNAllman 25

I measured the total, fully-opened length of the Allman to be just over 6.5 inches in length.

WESNAllman 16

Another photo of the Allman’s impressive blade.  Not long after I began trying out the Allman, I was at the shooting range with my son when a round got lodged in the chamber of one of the pistols we were firing.  It was jammed in pretty tightly, and my son asked for my knife and was able to carefully dislodge the jammed round by using the Allman’s blade as leverage.

WESNAllman 26

Next, let’s check out the flipper-style deployment mechanism of the Allman.  Like many folding knives today, the Allman includes a one-handed, rapid deployment feature, in this case, a “flipper”-style blade deployment. The Allman’s flipper utilizes a small tab attached to the backside of the blade that protrudes through the back of the frame when the blade is closed.  The user places their finger, typically the index finger, on this nub and rapidly flicks the nub downward into the frame, which deploys the blade rapidly in a flipping motion.  That’s it—no spring, no assist, and not an automatic blade, so it is a manual and generally much safer deployment operation than other knives.  The image above and the next two below demonstrate this from starting to a fully deployed position.

WESNAllman 27

WESNAllman 28

The flipping deployment mechanism didn’t take me long to get the hang of at all, due to Allman’s solid yet smooth ball-bearing pivot.

WESNAllman 32

The Allman’s blade has two features that help with grip.  One is a series of grooves positioned under the spot where the index finger snugs up under the handle.  This helps reduce the chance of your hand slipping off the knife.

WESNAllman 29

Additionally, the back side of the Allman’s blade has several teeth or spine jimping notches that are a spot for the user’s thumb to be placed while in use, again, to provide a better grip while cutting.

WESNAllman 30

Once the blade has been fully deployed and frame locked, Allman can be held quite securely and comfortably due to its contoured grip which includes a choil or indentation, for the index finger, and your next three fingers fit along the grip’s contour securely.  The flipper nub becomes a finger guard for your index finger.  And finally, the three spine jimping notches provide a perfect spot for your thumb to sit and give it extra grip and control.

WESNAllman 18

The Allman utilizes a ball-bearing for a smooth motion that aids in quick “flipper” deployment of the blade.

 

 

 

WESNAllman 19

A through-hold in the frame/handles allows for a lanyard or other item to be attached to the Allman.

WESNAllman 33

WESNAllman 06

What I like

  • High quality of materials and construction
  • Very well thought-through design incorporates many features of larger knives into a compact, medium-sized package
  • Perfect size for those of us who can’t practically or effectively EDC a larger knife
  • The entire knife feels very solid and the flip-deploy action is quite satisfying

What needs to be improved

  • Pocket clip location and design makes it ride up out of my pocket a bit higher than I’d like

Final thoughts

The WESN Allman is a great knife.  High-quality materials like S35vn steel and Titanium give it a solid look and feel, while its design and styling give it a unique look that also incorporates function into its grip and shape.  It incorporates many features of larger knives in a fairly modest size, and because of this is perfect for folks like me who can’t practically carry a much larger knife in their EDC kit.  I really like its flip-deploying action and pocket clip, and it fit great in the hand, which is an important factor as well.  I can envision the WESN Allman being part of my EDC for the foreseeable future.

Price: $165
Where to buyWESNgoods.com
Source: The sample of this product was provided by WESN.

10 thoughts on “WESN Allman Titanium knife review”




  1. Gadgeteer Comment Policy - Please read before commenting
  2. I bought one through Kickstarter. Very nice in all aspects except the pocket clip is not stiff enough to keep the knife secured in my pocket. I emailed them and got no response. Later during an announcement of another product I again emailed them and was told another style of clip would be available soon and I could buy it. That was several months ago and I’m still waiting on word when I can buy it.

    1. Then there is Gerber (and probably others) who’ll send you a replacement if you have any problems with it. And for a lot le$$.

  3. Wilson E. Stevens

    Your review of the knife is so great I am tempted to purchase one. However, in my opinion, this knife has one fault that concerns me. If you have ever had to remove splinters while on a job site, or cut a fish hook out of your arm while fishing, you need a sharp point. I don’t feel this point is sharp enough, or pointy enough to dig a sliver out of my palm or want to be used to carve on myself. I don’t even like the Tanto Point as it is to hard to use on slivers and fine work. I like a clip point knife for every day carry as I find that blade most useful.

    1. having removed more than a few hooks using line loops or pliers from a variety of folks I would say that cutting a hook out ranks up there with cutting Xs to suck out snake venom…there are just better ways

      splinters…if it needs surgery, see a surgeon

      daily use, a clip point is my choice as well
      however, if they are sharp enough a spear point is very useful and generally non-threatening

  4. I bought one of these last year on their kickstarter and it has been in my EDC ever since. I love it!
    I do know what you mean about the pocket clip, what I did with mine was; I removed the pocket clip altogether (it’s a T6 size screw) and added a WESN LB paracord through the lanrayd hole at the base of the handle. Now it sits in the bottom of my pocket, and I just pull on the paracord whenever I need it.
    Also I just backed another WESN kickstarter for their latest knife, “the Henry” can’t wait to try that one out!

    1. Thanks for stopping by and taking the time to provide your comments, Benjamin. That’s a good solution with the paracord and although the pocket clip really isn’t a big issue with me, I might give it a try.

      I also recently saw WESN’s Kickstarter campaign for their new “The Henry” knife. I like its looks and maybe we will have the chance to review one here at The Gadgeteer.

  5. The headquarters are in Detroit, MI I get that.
    However, wher are the knives produced (made)?
    I don’t see them screaming proudly made in “USA”.
    Please advise…

    1. CHINA, It was my understanding that the customs laws requires the manufactured country to be on the product. Not on the WESN though. They wouldn’t even tell me where they were manufactured when I asked them.

  6. After reading this I contacted them and they confirmed they are made in China…Interesting though the adress on the knife box is a PO Box about 40 minutes outside of Detroit…So I wonder whats actually happening IN Detroit to put it on the box…

Leave a Reply to Benjamin Laws Cancel Reply

Your email address will not be published. Required fields are marked *