SwitchEasy Blocks Customizable Dock Building Set for Apple Watch review

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

switcheasy_blocks1
As a LEGO fan and an Apple Watch owner, I had heard about people building their own Apple Watch charging stands with LEGO blocks. When SwitchEasy came out with its Blocks Apple Watch charging stand, I jumped at the chance to take a look at it.

switcheasy_blocks2
On paper, the SwitchEasy Blocks charging stand sounds great. It includes a form-fitting cradle to hold the Apple Watch in place; it is bumper friendly in case you put your watch in a case; and it can use bricks from various manufacturers, including LEGO. The kit also contains two different charging clips to hold either the plastic-encased charger for the Apple Watch Sport or the thinner metal-cased charger for the Apple Watch and Apple Watch Edition.

switcheasy_blocks3
The stand was more difficult to assemble using the enclosed directions that I anticipated. The instructions were confusing, even for me, and I’m an experienced LEGO builder. Combine that with missing parts and parts that were a different color than the in the instructions, it took me a lot longer than usual to finish.

switcheasy_blocks4
The bricks were a little stiffer to put together than LEGO bricks, but they stayed together. (Some non-LEGO bricks have a tendency to fall apart easily.) However, once built, the stand was unstable. The instructions give you no clue that the two small green baseplates need to be connected somehow, which meant the watch stand would tip when I put my watch on it. I fixed that issue by connecting the two baseplates with some extra bricks.

switcheasy_blocks5
However, there was a bigger issue.

The cradle is molded to fit the Apple Watch, and the watch fits very well. Unfortunately, the charging cable threads through the back of the cradle, right where you need to put the watch strap.

switcheasy_blocks6
As a result, the watch does not sit in the cradle. People with the Apple Watch Sport might not find a problem here, because you can straighten out the watchband, but people with loop bands might find it difficult use.

All is not lost, though.

switcheasy_blocks7
The charging clip itself fits on top of any brick with two studs on top, so I grabbed a handful of my own LEGO bricks and built a simple charger with proper cable management. It works great.

switcheasy_blocks8
If you want the clips to build your own watch stand, go for it. If you want to use the stand as-is, you might need to drill out a new cable management slot on a non-band side of the cradle.

Source: The product sample for this review was provided by SwitchEasy. For more information, please visit their site for more info.

 

Product Information

Price:$19.99
Manufacturer:SwitchEasy
Retailer:SwitchEasy
Requirements:
  • Apple Watch
Pros:
  • Compatible with most building blocks
  • Bumper friendly
  • 92 building bricks, assorted colors
Cons:
  • Building instructions are confusing
  • Cable management prevents watch from fitting into the cradle

2 thoughts on “SwitchEasy Blocks Customizable Dock Building Set for Apple Watch review”




  1. Gadgeteer Comment Policy - Please read before commenting
    1. Margaret Dornbusch

      I think it would depend on which size watch you have. SwitchEasy says the cradle will fit watches with bumper cases. I have a 38mm watch, and you can see in this picture that there is quite a bit of room around it: http://the-gadgeteer.com/wp-content/uploads/2015/09/switcheasy_blocks01.jpg. I’m not sure whether a 42mm watch with a case would fit. It wouldn’t hurt to contact them for advice. Their support email address and phone number is listed on the product page.

Leave a Reply to anson Cancel Reply

Your email address will not be published. Required fields are marked *