Wi-Fire Long-range WiFi Adapter Review

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

Wifire1

For part of the year I live in an area where the local telecom company advertises dial-up as high speed Internet access.  To keep my sanity and actually get something done, I spend a lot of time at the library using their broadband connection or war-driving looking for open hot spots.  With the Wi-Fire WiFi adapter, I’ve found many more places where I can get online access.

Specifications:

  • IEE 802.11b/g
  • 2.4Ghz
  • Channels 1-11 N.A.
  • Channels 1-13 rest of the world
  • Max Pwr +27dBm
  • Security WEP,WPA WPA2
  • USB 2.0
  • Windows, Mac and Linux compatible

Wifire2

Everything you need is in the box; the adapter, extension USB cable, Quick setup guide and the software on a CD.

Installation was a piece of cake.  I didn’t use the enclosed disk, but downloaded the latest version from their website.  Make sure  not to plug in the device until advised to to so during the software installation.

Wifire3

The device plugs into an available USB slot.  It is rather unique looking and I did get comments from people around me when I was in a public library.

Wifire4

The device can be set on a table or  mounted on a laptop screen.     Wifire5

Now it was time to check this thing out.  I enlisted my wife to be the driver while I searched for open hot spots.  I was amazed at the number of hot spots I could now see and especially the number of them that were open.  It’s amazing how many people don’t encrypt their signal.  We followed a path that I had recently trolled using a Buffalo Technologies WiFi PCMCIA card and would say conservatively that using the Wi-Fire device, we could  see  twice as many.

Wifire6

Not wanting to break any laws about stealing WiFi signals 🙂 I conducted some of the testing at the local library where I’m a member.  Also, it was more comfortable.

Wifire7

The Wi-Fire application is probably the easiest connection manager I’ve used.  An icon resides in the task bar and with a double click a window similar to the above will come up.  You can then select the best open access point.  If auto refresh is selected, the list of access points and the relative strength get updated automatically.

To increase the signal strength you grab the back of the Wi-Fire unit and rotate it for the best signal as shown on the signal quality bar.  The unit head can be rotated around 2 axis and allows a large range of motion.  It is however, VERY directional and small increments of movement can result in  large increases/decreases of the signal.

Wifire8

Another feature of the application monitors the signal quality over time.  The above graph was done while I was sitting outside the library and illustrates a shortcoming of this device.  There is very little difference in signal strength using the Wi-Fire as opposed to using my PCMCIA card when accessing the hot spot through  obstructions.  In this case it was a brick wall between me and the Linksys router.

While writing this review in the library, every now and then I would lose the Internet connection.  At first I attributed it to something with the library’s broadband.  Unfortunately I didn’t have the quality graph running during these failures because if I did, I would have found the problem sooner.

Turns out that the Wi-Fire is not only directional, but has a narrow “field of view”.  The Wi-Fire was pointed at the Linksys router with a clear view across the book check out desk.  Every time someone stood between me and the router, I would loose the Internet.  This would last as long as the view was obstructed and was somewhat dependent upon the size of the person.  I switched back to my PCMCIA card to check and didn’t have the same problem.

I wasn’t able to verify whether the Wi-Fire would work at the stated 1,000 foot range.  I suppose if you had line of site to the WiFi access point it might, but I wasn’t able to duplicate the conditions.  It did pull in more hot spots, but it was rather touchy in that the aiming had to be very precise for a strong enough signal.

If used in a stationary location with a clear line of site to the WiFi access point, the Wi-Fire adapter works very well.  It’s a little on the expensive side when compared to USB “N” adapter.

 

Product Information

Price:$59.95
Manufacturer:hField Technologies
Requirements:
  • Windows, Mac, Linux, USB 2.0 port
Pros:
  • Pulls in many hot spots
  • Easy installation
Cons:
  • Very directional
  • 802.11b/g only
  • Expensive

8 thoughts on “Wi-Fire Long-range WiFi Adapter Review”




  1. Gadgeteer Comment Policy - Please read before commenting
  2. I received this item in a timely manner. It came with a mini compact disc, which my Macbook cannot read, due to the size. The company was quick to reply with a link to the drivers, which did not work. I will edit this review when I get the device to work. It does not look promising.

  3. Unfortunately, I don’t have a Mac to test the unit. Mine came with a standard size CD which has Mac v.1.1 drivers. The box states “Mac OS X 10.4 (tiger) and 10.5 (leopard). Is related to the Snow Leopard incompatibilites I’ve been reading about? If so, now you know how us Windows people feel. I dread upgrading to 7 after all the grief I went through with the Vista upgrade.

    Let us know the outcome.

  4. I don’t know about you guys, but I got UAWIFI UA3 usb adapter for 99$ and very happy with it.
    No other adapter can compare to this baby, it is VERY powerful.
    There are few people sell them on ebay, but I got mine directly from mft. website uawifi.com

  5. Thanks Ray, purchased UAWIFI UA3 few days ago. I love it. Previously with my laptop’s internal card I was getting around 14-15 signals in my apt. but with UA3 I get over 30, and few of them are open with out password ))))
    Good adapter, thumbs up for http://www.uawifi.com Great job guys!!!!

Leave a Reply to Jackie Cheng Cancel Reply

Your email address will not be published. Required fields are marked *