Keyport Slide 3.0 and Pivot key organizers review

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

keyport 0006

Ever since I reviewed the Keyport Slide 2.0 over 3 years ago, I’ve been looking forward to the Slide 3.0.  Keyport’s products are like smartphones. They get sleeker and have more functionality with each version. I’m happy to report that the Keyport Slide 3.0 is here along with the new Pivot key organizer and I finally get to check them out.

What are the Keyport Pivot and Keyport Slide 3.0?

The Keyport Pivot and Keyport Slide 3.0 are customizable and modular EDC key organizers that help you streamline your gear into a package that is small enough to fit in your pocket. The Pivot has been designed to work with your existing keys, while the Slide 3.0 works with Keyport’s key blades and their other blade tools.

Keyport Pivot

keyport slide3 7

The Pivot is a brand new product for Keyport. It’s a minimalist key organizer made of anodized machined aircraft grade aluminum in either red, black or silver. As you can see, I was sent the red version.

Included with the Pivot are separator washers, an extension pin, and a screw removal tool (not pictured).

keyport slide3 12

The Keyport Pivot has been designed to hold 4-9 keys and can be expanded to hold as many as 15 keys with an optional expansion kit (purchase separately) that adds an extra link to widen the hinge.

keyport slide3 10

The end of the Pivot has a link style hinge that folds and unfolds to create a narrow or wider frame for keys.

keyport slide3 15

It’s very easy to set up the Pivot. You just remove the screw from the end to open up the frame.

keyport slide3 16

If you plan to add a lot of keys, you can screw in the extension pin.

keyport slide3 14

The Pivot will work with almost any standard key as long as it has a hole at the top. It will also work with some of Keyport’s blade tools like the pen and USB flash drives shown above, as well as other blade tools including a Griffin Pocket Tool which has a pry bar and hex wrenches.

If you happen to have a Keyport Slide 2.0 with some blades, they may or may not work with the Pivot depending on the blade and when you purchased it. From the Keyboard FAQ:

The USB and Pen Inserts are compatible with the Pivot, if you received them after February 2016. The Mini Light and Bottle Opener Inserts are not compatible.

 

keyport pivot 3

To add keys you just open the Pivot, add the spring washer first so it will be under your stack of keys. The keys and blades go next. You will need at least one key minimum above the female pin. If you don’t have enough to fill the space, you can use the included spacer washers. I had to use two spacers.

The Pivot’s anti-rotation mechanism ensures that the keys never come loose. If you do it this recommended way, the male pin will actually start clicking as you tighten it down with a coin to your desired tension, and will never come loose. If the Spacers or keys are flush or below the female pin, it does not work as intended. Keyport created a video guide which explains it very well.

keyport pivot 2

keyport slide3 18

With the keys loaded, you just fold the frame back in place and tighten the screw.

keyport pivot 1

keyport slide3 20

The keys and blades fold out like the blades and tools of a swiss army knife. The whole design is slick and simple just the way I like my EDC gear. But wait, there’s more! 😉 See those square holes on each side? They aren’t just there for decoration, they are attachment points for Keyport modules.

But wait, there’s more! 😉 See those square holes on each side of the Pivot? They aren’t just there for decoration, they are attachment points for Keyport modules.

keyport slide3 21

One of the Keyport modules is a knife. This is a Keyport tool that I’ve been wishing for since the Slide 2.0! Made by Klecker knives, it’s a great little 2.2 inch drop point blade slip lock pocket knife.

keyport slide3 25

When you turn it over, you can see the modular clip design. The clips slide into the slots in the Pivot frame and lock in place.

keyport slide3 22 keyport slide3 23

Once attached, the module stays attached until you press the center lock and slide it out of the holes.
keyport slide3 24

Also notice that the knife module has holes too, so you can attach another module to it like the LED flashlight, Bluetooth locator with LED flashlight or just the flat side rail. Just be careful though, once you attach a module to the knife, it can be difficult to remove it.

The Keyport Pivot is definitely a worthy addition to Keyport’s line of key organizers. It’s expandable if you need to use more than 4-9 keys, is easy to use and is configure. For EDC minimalists, it ticks all the right boxes.

Price: $19.99 for basic Pivot.  Blades, and modules are an extra purchase.

Keyport Slide 3.0

keyport slide3 27

The new Keyport Slide 3.0 is a little longer but much sleeker than the Slide 2.0 and it’s made of aluminum instead of plastic. Like the Pivot, the new Slide 3.0 is available in black, red and silver. Keyport sent me the black version.

keyport slide3 26

The Slide 3.0 comes with four nodes which are the little spring loaded buttons that you use to extend and retract the blades and keys.

keyport slide3 28

Unlike the previous version of the Slide 2.0 which was only available in a six slot version, the Slide 3.0 is available with four slots or six slots to hold keys and blades.

keyport slide3 29

The top of the Slide has to be removed to load the keys and blades.
keyport slide3 31

Like the Pivot, modules can be attached to the Slide 3.0 by removing the side rails.
keyport slide3 32

Keyport sent me:

  • LED flashlight module – 12 lumens and is powered by 2 CR1220 batteries ($9.99)
  • BLE locator with LED flashlight module which uses the Trackr app to keep track of your Keyport from up to 75ft away. The flashlight is 6 lumens and is powered by 2 CR1220 batteries ($29.99)
  • Chip module which supports a variety of auto and motorcycle transponder chips ($7.99)
  • Klecker knife module ($19.99)
  • Pen blade with black ink ($8.99)
  • USB flash blade which is available in 4, 8 and 32GB capacity ($14.99, $19.99 and $49.99)

keyport slide3 3

Unlike the Pivot, you can’t just add your existing keys to the Slide 3.0. You have to use special key blades. To get them, you have to send images of your keys to Keyport so they can send you the correct key blanks which you then take to a locksmith to grind your keys.

I had two keys blades from the Slide 2.0 that worked fine in the Slide 3.0, but additional key blades run $4.99 each.

keyport slide3 5

The blades slide into one of the Slide’s slots.

keyport slide3 2

And then the node snaps into the hole at the end of the blade.

keyport slide3 4 keyport slide3 8

The blade can extend and retract by sliding the node up and down the channel.

keyport 0004

 

The blades feel a little stiff sliding back and forth along the channel when you first start using the Slide, but they loosen up after some use. After a short break in period, the action works pretty smoothly. The nodes lock into the ends so that the blades don’t extend or retract when you don’t want them to. To extend or retract a blade you just press the node to unlock it from the end of the slot and then slide it in either direction.

keyport 0003

Here’s the Slide 3.0 with the knife module attached to one side.

keyport slide3 11

And the flashlight module is attached on the other side.

keyport 0005

Even with two modules, two keys and two blades, the Slide 3.0 is still compact. The Keyport Slide 3.0 weighs a bit more than the Slide 2.0 since it’s made of metal instead of plastic, but it feels a lot more solid and rugged. I don’t mind that it weighs more because it feels like a quality tool in my hand.

keyport slide3 13

When you purchase the Pivot or the Slide 3.0, it also comes with a 2-year subscription to KeyportID which is an online lost and found service that connects Keyport owners and finders directly and anonymously without needing a middle man.

Final thoughts

Keyport has done it again with their new Pivot and Slide 3.0 key organizers. They are both well made and well priced. I have no problem saying that they will become very popular with the EDC crowd.

Source: The sample for this review was provided by Keyport. Please visit their site for more info.

 

Product Information

Price:Pivot - $19.99, Slide 3.0 4 slot version is $39.00 and 6 slot version is $49.00, blades and module prices vary
Manufacturer:Keyport
Pros:
  • Slide 3.0 - One handed use
  • Slide 3.0 - Modular
  • Slide 3.0 - Compact way to keep your primary EDC items
  • Pivot - Used with your existing keys
  • Pivot - Modular
  • Pivot - Compact way to keep your primary EDC items
Cons:
  • None

11 thoughts on “Keyport Slide 3.0 and Pivot key organizers review”




  1. Gadgeteer Comment Policy - Please read before commenting
  2. That looks cool and you almost had me at the knife, but it sure looks heavy and un-pocketable. I hate my own key set and they aren’t pocketable either but I just tuck the huge Ford key in my waistband, keyring hangs against my belt, suit coat over it and there we go. Hate keys !

  3. Nobody seems to be working on the car key fob issue, though. I have 2 massive fobs that I carry, and these days with the Kevo lock very few actual keys (backup door key is all that I really need to carry day to day). So I have a ring with 1 key and the 2 giant fobs hanging off it.

    In a perfect world, I would be able to either get an app or a single fob that could be programmed to work with both cars. At least that would reduce what I had to carry.

      1. The online auto checker leaves a lot to be desired…every choice you can make says to either attach the fob with a carabiner or carry it separately. Buried in the text on the “how to” page is a link to email their sales team, so I just did that. Hopefully either my Mazda or Honda will be compatible…

  4. Michael ODonnell

    The days of traditional key locks are numbered – pun intended (much like paper periodicals). Let’s get rid of keys altogether. I can open my front door with my iphone and banks and consumers trust finger print readers on iphones; or NFC. Surely auto manufacturers could provide me a way to manage the lock on my car without having to carry that over sized fob. Those fobs are so 90’s.

  5. I got the Pivot Essentials bundle, which is the Pivot + the flashlight and the 10-1 tool. This configuration (without the extension link) fits the 2 keys I always carry, my store membership/FiveStars cards, and the multitool. The flashlight is very bright. Interesting that the LED seems to be exposed. I hope I don’t accidentally smash it one day. The multitool has a box opener, which is what I need all time time. (too much Amazon.com?) The clincher was that it is TSA-allowed – I sometimes need a small cutter when on travel. Previously, I had to leave my little Swiss Army knife at home.

    I previously carried a tiny Swiss army knife with scissors, 1″ blade, flashlight, and crappy pen on my keychain. Turns out I mainly used it to open boxes. I am replacing the cutter and flashlight function with the Pivot Essentials. I am debating on getting their pen. I would have to expand the Pivot, which would make it that much wider. I like the current compact size. I also like that my keys don’t jingle in my pocket and point every which way as I walk.

      1. Here is my 4 month update:
        – I found that the bundle of keys, while quiet, does not collapse down in my pocket like on my old-style key ring so makes a big lump in my pocket. (-1 point)
        – I imagined my keys and cards would fold into a neat bundle like the Keyport Slide 3, but my items are all different lengths and widths so folds into a misshapen blob. (-1 point)
        – The cutter is good for single layer packing tapes but not on tapes with string reinforcement. (-1 point)
        – I was able to get through San Jose and Burbank airports no problem (+5 points).
        => final tally +2 points, so I am keeping it.

        1. Thanks for the update John! Glad to hear that it’s working out for you. I thought I might go back to using it after a lengthy hiatus, but since changing my home’s door lots to electronic touch key locks, I don’t need a keychain at all. The only “key” I need to use these days is my MINI Cooper keyfob. If I had a newer model MINI, I wouldn’t even need that as the new ones are proximity based so I could just leave it in my or jacket pocket.

Leave a Comment

Your email address will not be published. Required fields are marked *