Avantree Saturn Bluetooth music adapter review

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

Avantree01

I’ve noticed that many of the new audio gadgets are now Bluetooth-capable, but what can you do about those that aren’t or are legacy products?  Avantree provides a solution with their Saturn Bluetooth receiver and transmitter, a small portable device that can turn your wired audio device into a wireless device.

Specifications:

* Bluetooth profiles supported: apt-X, A2DP and AVRCP
* Operating Range: Class 2, 10 meters
* TX mode working time: 10 hours
* RX mode working time: 9 hours
* Standby time: up to 400 hours
* Battery: 270mAH rechargeable LI-polymer battery
* Product weight: 48.5g
* Size: 50mm(L)x37mm(W)X13mm(H)

Avantree02

The package comes with all the cables you’ll probably need to connect to your audio device.  The USB cable is only needed for charging.

Avantree04

There’s really not much to it.  On the front is a switch to select either transmit or receive mode.  The multi-function switch in the center turns the Saturn on/off and puts it into pairing mode.  On the top right is a LED that indicates what mode it’s in.

Avantree05

On the other side is the connector for the charging cable and the 3.5mm jack for audio input or output.

The first thing I did was charge it.  The LED indicated red during the cycle until it was fully charged and then turned off.  A  nice feature of the unit is that it can be used while charging, so if you want to leave it attached to your sound system, for example, you can without having to worry about the battery running out.

Avantree03

To test out the unit, I went searching in the back of my forgotten gadget closet and came up with a couple of audio devices including an old Bluetooth headset and two prior generation MP3 players.  In addition I have my LG soundbar which is Bluetooth compatible, and an iPod Touch.

Perhaps I’m losing brain cells because I had some trouble at first determining whether to put the unit into receive or transmit mode when connecting to an audio device.  After some thought, it’s really not that difficult.  If you’re going to be sending audio from a device to the Saturn, it should be in receive mode.  If the audio is being sent from the Saturn to a Bluetooth audio device it will be in transmit mode.  When in doubt, read the manual, which aside from the broken English, is helpful.

The first thing I tried is to use my Bluetooth headphones with one of our TVs so I can watch shows after the rest of the household goes to sleep.  I used the double-ended 3.5mm plug to connect to the headphone output of the TV and went through the pairing process.  When the Saturn is turned on for the first time, it will enter pairing mode.  The procedure to pair is detailed in the instruction manual, and I had no problems.  The Saturn will remember up to 8 paired devices so you only have to go through the process once.

At first when listening to the TV, I had a problem with the sound dropping out as I moved around the room.  I solved this by positioning the Saturn at the front of the TV with the 3.5mm audio cable.  Because the Saturn was behind the TV, the signal was apparently being attenuated, causing the dropouts.

I then connected the Saturn to one of my old MP3 players and paired it with the LG soundbar in the den.  Again everything worked well, and I heard two-channel sound without any distortion or noise.  I used the other old MP3 player and got the same results.

In the living room, I have another TV hooked to a Lepai amplifier and two bookshelf speakers.  I use this with the TV to get better sound.  The Lepai has no Bluetooth capability, so I connected the Saturn Music Adapter to the amp and streamed audio from my iPod Touch.  Again, it worked well, and I appreciated the ability to stream music in the living room.

One use that I really appreciated was the ability to turn a wired pair of headphones into a Bluetooth pair.  By using the double ended 3.5mm plug, you can easily adapt the headphones for use with Bluetooth audio music sources, such as an iPhone or iPod.

I tried various combinations of the Saturn with different devices and all worked well.  The Saturn will reconnect with the last-connected device, which caused me some confusion.  I was trying to connect to a Bluetooth speaker, but wasn’t having any success until I realized that my iPod Touch was in the same room with its Bluetooth enabled.  It was the last device I had connected to.  Turning off the Bluetooth on the iPod solved the problem.

If you want to connect to two audio devices that are not Bluetooth equipped, you can purchase two Saturns and set one to receive and the other to transmit, and you’ll have a wireless connection.  The Avantree Saturn Bluetooth Music Adapter is a smart purchase for anyone wanting to connect audio devices wirelessly.  This is especially true if you want to re-purpose devices that may be technologically out of date.

 

Product Information

Price:$41.99
Manufacturer:Avantree
Retailer:Amazon.com
Requirements:
  • Audio input or output
Pros:
  • Small
  • Flexible
Cons:
  • None

17 thoughts on “Avantree Saturn Bluetooth music adapter review”




  1. Gadgeteer Comment Policy - Please read before commenting
  2. Hey there! Thinking of buying one of these Saturns myself, primarly to watch and listen TV through Bluetooth speakers.

    My only doubt is the potential for audio lag difference from the vídeo presented on the HDTV. Did you notice any audio lag in your tests with your TV?

  3. Is there any static noise/ other interferneces when listerning to audio transmitted via Avantree bluetooth audio tranceiver?

  4. Does this automatically turn off? Do you have to press the button everytime you wish to use it or will it turn on as soon as it detects a paired device?

  5. Jason,

    It will turn off in 5 minutes if it senses that there is no Bluetooth device connected. When you turn it on, it will connect to the last device to which it was connected.

  6. I am trying to connect 2 pairs of bluetooth headphones to my tv using a saturn as the transmitter. Do you know if this will work or perhaps another way of achieving this

  7. Would this plug in to the headphone plug in an airplane so that I could use my Bluetooth headphones wireless while watching an in-flight movie?

  8. Carlos,

    If you can plug a standard wired headset into the airplane jack and it works, the Bluetooth headset should work. I don’t have an airplane handy to check it out 🙂

  9. Neil,

    It depends. If you use the headphone output on the TV, it will mute the TV speakers. If you have RCA outputs then the TV speakers will work at the same time.

  10. For John,

    an old fashioned work around is to use a 3.5mm cable splitter to split the audio and then use 2 transmitters (for each split) to transmit to individual BT headsets. More expensive but would definitely work.

    Also, handy to have a second unit if you want to use quality wired headsets wirelessly later.

  11. for john
    if you want to connect two headphones to a tv at the same time, you can purchase another avantree product, the “priva”.

  12. Will it work perfectly if I connect it to my sony bravia smart tv to get the output from harman kardon bluetooth speaker;and if it will,will the quality be the same as the speakers sound quality is.

Leave a Reply to Bill Kuch Cancel Reply

Your email address will not be published. Required fields are marked *