WinAmp Remote Control Review

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

Product Requirements:
Device:
PC with a free serial / COM port

Have you ever had the desire to control your
WinAmp
media player software with an IR remote control like you do your
stereo or television? The WinAmp Remote Control from
TekGems will allow you to do just that.

The WinAmp Remote is actually a Packard Bell Fast Media Remote Control that
at one time came included with some of their higher end desktop PCs. TekGems has
repackaged this remote with a free software application called WinLIRC and a
plug-in for WinAmp.

winamp remote5
winamp remote6

To start using the remote, you must first attach the IR receiver to your
desktop PC. The receiver is a square plastic IR module with a 6 ft cable and a
serial connector at the end. The serial connector pretty much clues you in that
this product is a couple years old. Too bad it didn’t utilize USB instead. After
you plug the cable into a free serial port on the back of your computer, you
have to install WinLIRC which is included on a floppy along with some basic
installation instructions. Although WinLIRC has quite a few options that can be
configured, the instructions included with the remote only tell you to change
the COM port to reflect the port that you plugged the cable into.

winamp remote1

The next step required before you can begin controlling WinAmp is to copy a
.DLL file (included with WinLIRC) into the plug-in directory of the WinAmp
installation. This is where I ran into a slight snag. I had installed the latest
version of WinAmp (3.0) and found that the plug-in directory did not exist. I
thought I was out of luck reviewing this product until I noticed that an older
version of WinAmp was included on the WinLIRC floppy. This older version did
include a plug-in directory, so I was good to go. I installed the .DLL and was
able to begin programming commands into the remote that would allow me to
control the operation of WinAmp with the handheld infrared remote.

winamp remote2
winamp remote3

The remote itself is made of plastic and has 34 buttons that can be
programmed to do over 40 different tasks such as next track, previous track, up
volume, down volume, stop, play, pause, top of play list, bottom of play list,
etc. The buttons all have decent tactile feedback and the remote is comfortable
to hold. I actually found it to work pretty well even from as far as15 ft away.

 winamp remote4

For $11, you really can’t beat this product IF you want the ability to
control your media playback with a remote control. That is, if you don’t mind
having to use an older version of WinAmp with it. However, if you dig around a
little, you can find other software on the net that will let you use the remote
to control other PC tasks. Personally, when I want to change tracks or adjust
the volume on my media player, I just click the GUI with my mouse since I’m
already in front of the computer. If you find that you aren’t always in front of
your PC, but close by, this product might just be the thing you need when you
want to turn up the volume on the latest Nickel Creek track.

 

Price: $10.99

Pros:
Inexpensive
Control WinAmp from several feet away

Cons:
Doesn’t work with latest version of WinAmp
Uses a serial connection instead of USB

 

Product Information

Price:10.99
Manufacturer:TekGems
Pros:
  • Inexpensive
  • Control WinAmp from several feet away
Cons:
  • Doesn't work with latest version of WinAmp
  • Uses a serial connection instead of USB

3 thoughts on “WinAmp Remote Control Review”




  1. Gadgeteer Comment Policy - Please read before commenting

Leave a Reply to Arnaud Cancel Reply

Your email address will not be published. Required fields are marked *