Wear Your Palm III

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

Product Requirements:
Device:
Palm III series, Palm VII series, and Palm V series

I’m sure you’ve heard the term “wearable computers”…? Often
people wear their PDAs on their waist in a belt case. For me, that is the most
comfortable and convenient method. But, some people want to wear their PDAs
around their neck. This review will show a couple ways to make this possible.

The Bond for the Palm V / Vx

Besides having the Bond Latch for the Palm III
series and original Palm Pilot, the people at Force Technology Corporation have a version of the Bond for the Palm V/Vx series
PDAs.

The Bond Connection attaches to the PDA using the stylus slot in the sides of
the Palm V/Vx unit. Small solid sterling silver cups which they call klein cups slide into the
stylus slots. These cups have rings on them for a neck cord.

Installing the Bond is a 5 second operation and is very easy to do. The cups
are tapered and easily slide down the stylus silo. Once they are in place, they
won’t slip out by accident. They are also formed out of a solid piece of metal
which I don’t foresee breaking very easily at all.

bondpalmv3
bondpalmv2

The nylon cord is black in color and feels sturdy enough to hold the PDA
around you neck without ever breaking. A plastic slider allows you to adjust the
length of the cord for your neck.

bondpalmv4

Wearing the Palm around your neck might sound uncomfortable but it really
isn’t. I didn’t find the weight of the PDA to pull that much at all on my neck.
One thing that I did notice was that the PDA would swing back and forth or bang
into my stomach as I walked with it around my neck. If you use this product and
wear a shirt with buttons and or zippers, make sure that you turn the PDA screen
out while wearing it so that you don’t accidently scratch the screen.

bondpalmv1

You might be thinking that if you use the Bond, you’ll no longer be able to
use your stylus. Force Technology Corp. solved this problem by supplying you
with a replacement stylus barrel. This silver plated shaft is shorter that the stock
stylus and works great with the Palm V and Bond combo. Just unscrew the original
stylus top and tip and put them on the shorter barrel and you’re good to go.

You also don’t need to remove the Bond in order to hotsync. Just pull the
cord out the way and plop it in the cradle as usual.

I think that the Bond Connection is a good product for someone that needs
their Palm V/Vx in very close proximity and ready for use at all times. I would
not recommend it for someone that is constantly walking around though because
the PDA might get banged around more than necessary.

 

Price: $29.95

Pros:
Simple to use
Allows your Palm V/Vx to be instantly accessible
Replacement stylus included
No need to remove in order to hotsync

Cons:
Swings back and forth while walking
Screen remains unprotected while in use

 

The Bullet for the Palm V / Vx

The Bullet from Brando Workshop is basically a cheaper version of the Bond Connection. It looks the
same but isn’t quite as good as the Bond.

For one thing, the cord is several twisted strings instead of one woven cord.
Given time, the cord would probably come untwisted.

bullet1

The string lock on my review unit would not lock the strings in place. Due to
the fact that there are plastic stops at the end of the strings, the PDA won’t
fall off your neck, but it is annoying not to have the PDA stay in place.

The metal cups on the Bullet are also quite a bit smaller than the ones that
the Bond uses. As a result, I found that I could almost pull the cups out of the
stylus slots even when they were pushed almost all the way down the silos.

bullet2
Left to right: Bullet cup, Bond cup

When the Bullet is installed, the original stylus does not fit in the silo
and you don’t get a replacement barrel like you do with the Bond.

Although the Bullet is about $10 cheaper than the Bond, I recommend the Bond
over it because it is made better and is more secure.

Price: $150 HK (~$19.25 US)

Pros:
Simple to use
Allows your Palm V/Vx to be instantly accessible
No need to remove in order to hotsync

Cons:
Swings back and forth while walking
Screen remains unprotected while in use
String lock isn’t secure
Replacement stylus is not included

 

MyCoolClip for the Palm III and VII Series

MyCoolClip from MyCoolClip.com is a
wearable solution for Palm III and VII series PDAs.

The clip hooks in to the notches in the bottom of the case. The same notches
that other accessories like the Palm modem use.

coolclip1

Basically, the clip is a thick piece of bent wire that has had the ends
soldered to make them smooth. The clip has a flexible plastic tube covering it
that can be used to hold a spare stylus which is included. Putting the CoolClip
on your PDA is not easy. The wire is very strong and doesn’t want to bend. You
have to almost use brute force to get it in the slots. Once you do, it is very
secure. But getting it off is another matter. I was slightly afraid that I was
going to scratch up the case getting the clip on and off.

coolclip2
coolclip4

A blue nylon cord with a metal swivel attaches to the clip. You can wear the
PDA around your neck, or you can hook it to your belt with the included belt
loop clip.

This small blue plastic clippie thing, slides on your belt loop and then the
nylon cord slides on it. You can use this for  drop prevention when you
keep your PDA in your jeans pocket. I would not use the clippie thing to hang
the PDA from your belt though.

coolclip3

Like the Bond and Bullet, you can sync your PDA in the cradle without having
to remove the MyCoolClip.

This is a very inexpensive solution and works as advertised. It does look a
little ‘home brew’ to me though. If you don’t mind this, give it a try.

Price: $11.95 plus $2.00 shipping/handling

Pros:
Allows your Palm V/Vx to be instantly accessible
No need to remove in order to hotsync
Inexpensive

Cons:
Hard to put on and take off
Swings back and forth while walking
Looks a little ‘home brew’

 

 

Product Information

Price:
Pros:
  • Allows your Palm V/Vx to be instantly accessible
  • No need to remove in order to hotsync
  • Inexpensive
Cons:
  • Hard to put on and take off
  • Swings back and forth while walking
  • Looks a little 'home brew'
  •  

Leave a Comment

Your email address will not be published. Required fields are marked *