Keyspan USB PDA Adapter Review

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

Program Requirements:
Device:
Most serial PDAs

Desktop:
Windows 98 or Macintosh computer with a USB port
1.9 Meg for Windows, 288k for Mac

What’s the biggest hassle when it comes to electronic gizmos like PDAs?
Trying to find a free COM port on your PC to hook it to! Keyspan
has come to the rescue with their USB PDA Adapter. This small adapter provides
one RS-232 male DB9 port for direct connection to a PDA cradle or
synchronization cable. It draws its power from the USB port on your PC so a
power adapter is not required.

keyspan1

This adapter will work with PDAs like the PalmPilots, Windows CE Palm-size
PCs and other serial devices. There is one thing you need to make sure before
buying this adapter. Make sure that the software that your device uses can be
set to connect to COM ports other than the standard 1 thru 4. Because once you
set up the Keyspan Adapter, it will become the next COM port in line. On my
system, it became COM5.

The adapter has a serial connector on one end and a USB connector on the
other. You plug the serial cable of your device into the serial end and then put
the USB connector into your PC or Mac. A CD comes with the adapter that includes
drivers for Windows 98 machines and Macintosh computers. Installation is very
easy and once done, you’ll have an extra COM port on your PC.

I tested this adapter with a Casio E-100 Palm-size PC and a Palm V PDA. In
order to use it with the Casio, I had to change the COM port it was connected to
the new COM port. I also had to make sure the serial speed on the PDA was set to
57,600kps. Anything higher and it would not sync. Sometimes at 57,600kps, it
would take several times before the PDA and PC would finally connect correctly.
I found that overall syncing was slower than using a regular COM port.

With the Palm V, I had to make sure that I had the installed the latest
version of the Hotsync software (v3.0). This newer version allows you to select
COM ports other than 1-4.  This new version is available at http://www.palm.com
as a free download. I then had to set the port speed no higher than 57,600kps.
If I would set it higher, it would never sync and would even lock up my PC at
times.

Basically I found that the Keyspan USB Adapter works fine as long as you have
the port speed set pretty low. So, if you don’t mind that fact and you need more
COM ports, then this adapter should work well for you.

 

Price: $39

Pros:
Adds an extra COM port to your system.

Cons:
Have to set the port speed to no higher than 57,600kps for most
devices.

 

Product Information

Price:$39.00
Manufacturer:Keyspan
Pros:
  • Adds an extra COM port to your system.
Cons:
  • Have to set the port speed to no higher than 57,600kps for most
  • devices.

6 thoughts on “Keyspan USB PDA Adapter Review”




  1. Gadgeteer Comment Policy - Please read before commenting
  2. Once again nice review ladies

    Wasn’t it once said “you can’t be to rich, to thin or have to many flashlights” ?? (the same with PDA’S)

    I saw these do-dads at comdex too and thought they where like way cool. My mind wondered to all of the times I held a mag light in my mouth while I tried to get that last nut off, or under the sink (plumbing yuk!)

    I simply have to order the head band..

    This guy will make a pile of money, but so did the guy that thought up pet rocks…

    Laurence

  3. I have used products like the head band. They are very satisfactory, nad fit either directly onto your head or slip over a hat.

  4. “If you need another hands-free way to use your flashlight, you can always wear it around your head! I’ll warn you though, you’re going to look like an idiot… ”
    Proverbial

Leave a Reply to lopi Cancel Reply

Your email address will not be published. Required fields are marked *