RhinoPak 3000 Utility Case Review

We use affiliate links. If you buy something through the links on this page, we may earn a commission at no cost to you. Learn more.

The RhinoPak 3000 Utility case is a black zippered cordura case made by Rhinoskin. This case can accommodate palmtops up to
8.5″ x 5.5″ x 2″ in size.

The front of the case has a large zippered mesh pocket. If this pocket was just a bit
larger, it could hold a regular sized checkbook in it. Above the pocket is a band with 5
loops in it. You could attach carbiners to these loops and then hang other things off them
if you wished.

On the spine of the case is a handle with plastic D rings on each end. An included
shoulder strap can be attached if desired.

rp3000-3.jpg (9953 bytes) rp3000-4.jpg (11331 bytes)

The back of the case has a large zippered pocket that is the same size as the entire
back of the case. There are also 2 bands with 2 loops each sewed to the back. In the
middle of the back are two plastic strap holders. I guess you could slide the included
shoulder strap through these holders if you wished. Both the front and back of the case
are padded with what feels like foam inserts.  The case is held closed with a dual
pull zipper.

rp3000-5.jpg (7685 bytes) The interior of the case has all kinds of storage options. One side has a
mesh pocket that takes up half of one side. Above this pocket are two short and narrow
slots for batteries and a wider slot for business cards or other items.The inside spine
of the case has two elastic battery holders.

The other side of the case has a multitude of elastic bands for holding all kinds of
equipment. In the picture to the left, I inserted paper behind the straps so that you
could see how they are arranged.

I like Rhinoskin’s larger cases because they have so many pockets, and loops for
holding things (they are a Gadgeteer’s dream case). The RhinoPak 3000 is their best case
yet because of all the types of things you can carry in it. Below are just a couple
examples.

rp3000-2.jpg (12265 bytes) rp3000-1.jpg (9427 bytes)

The RhinoPak 3000 is made very well. I could not find any flaws in the stitching or
material. If you have a variety of gear and don’t mind the somewhat high price tag, this
might be the case for you.

Price: $49.99

Pros:
Made very well.
Front and back is padded.
Can hold all types of PDAs, and Palmtops.

Cons:
A little pricey.
Only comes in black.

 

Product Information

Price:$49.99
Manufacturer:Rhinoskin
Pros:
  • Made very well.
  • Front and back is padded.
  • Can hold all types of PDAs, and Palmtops.
Cons:
  • A little pricey.
  • Only comes in black.

29 thoughts on “RhinoPak 3000 Utility Case Review”




  1. Gadgeteer Comment Policy - Please read before commenting
  2. I know the built in wireless options are one of the biggest pulls for this PDA; the other being the screen (these are the 2 big ones that come to mind right now).

    My BIG question is, if you already have a 3900, what is the compulsion to make the switch? Is it just the wireless and perhaps the biometric security, or is the screen on the 5400 BETTER than the screen on the 3900?

    I am really interested in this PDA. I love my 3900; but I’m (finally, after about 2 years…) getting tired of carrying the PC Card Sleeve with it everywhere I go so that I always have my music. I’d like to find someway of leaving the PC Card Sleeve in the car (where I listen to most of my music). I’m also tired of my Targus CH300 wallet case being too skinny. I’ve got everything in my case (credit cards, $$ and receipts, check book, passport, business cards, and iPAQ. The case is, quite seriously, just slightly over stuffed (believe it or not), and I’m really wanting to use the Style Paq that came with the 3955 so that I can carry my iPAQ in my case without running the battery down (the application buttons keep getting pushed when the case is zippered shut and then belted closed with the velcro strap. As a result, the unit unknowingly gets turned on and remains on, draining the battery).

    I use the PC Card Sleeve in the Office for 802.11b connectivity, but wouldn’t need it with the 5400 because of its inheirant (SP) wireless connectivity.

    So again, what is, if any, the big compulsion to switch from the 3900 to the 5400? If its all 4 wireless options (802.11b, BT, Serial IR and Consumer IR) the screen (because its even better than the 3900 screen) and the bio security, then this is a slam dunk and a no brainer. If the screen is the same in the 5400 as in the 3900, then I’m going to need to consider this a bit more before I purchase one.

    If you could consider this during your review, I’d really appreciate it.

    Thanks!

    Kind Regards,

    Christopher Spera

  3. Chris,

    Unfortunately, neither Judie or myself have a 3900 to compare screen quality. I’ll try to find out if they do use the same screen. I do know that the screen on the 5455 is a billion times nicer than my 3800!

    I’m planning on doing some major bonding with this new PDA over the weekend. I have both Bluetooth and WiFi setup at home, so I will enjoy testing out those features.

  4. Cool. but as neither of you have a 3900, you’re right. This is going to be a difficult comparison. There isn’t a 5450 around Nashville to be seen in a retail setting yet, either; so I can’t give you the information myself. My guess is that the screens are identical between 3900 and 5400 because they are both transflective, so the point may be moot.

    From what Dale Coffing has said about memory and the interior of the 5400, its going to be difficult for Leonard and Pocket PC Techs to come up with some sort of memory upgrade strategy for the 5400 as well. It simply doesn’t have the room that the previous iPAQ’s have had. That means that hp either purposfully removed the ability for upgrades to be done (which I doubt) or that the memory type is different and the upgrade will either be a non-native upgrade, or expensive because it is a new/ different memory type, or both. 😡

    If both of these are the case tho, its going to cause me to give this purchase a serious reconsidering because I’ve grown accustomed to 128MB of RAM (not SD or CF) in my devices; and my compulsion to upgrade will have been slightly reduced since I already have most of what the 5400 offers via PC Card Sleeve and transflective screen…

    Christopher

  5. Originally posted by ChrisSpera
    Cool. but as neither of you have a 3900, you’re right. This is going to be a difficult comparison. There isn’t a 5450 around Nashville to be seen in a retail setting yet, either; so I can’t give you the information myself. My guess is that the screens are identical between 3900 and 5400 because they are both transflective, so the point may be moot.

    From what I’m told, the 54XX screen is somewhat better than the 39XX, but not a big leap.

    From what Dale Coffing has said about memory and the interior of the 5400, its going to be difficult for Leonard and Pocket PC Techs to come up with some sort of memory upgrade strategy for the 5400 as well. It simply doesn’t have the room that the previous iPAQ’s have had. That means that hp either purposfully removed the ability for upgrades to be done (which I doubt)

    I wouldn’t, given Compaq’s history of massive, unabashed greed (non-replaceable batteries, sleeves, etc.). It really wouldn’t surprise me if they designed it so that the only way to get more memory is to buy their next ludicrously overpriced device.

    or that the memory type is different and the upgrade will either be a non-native upgrade, or expensive because it is a new/ different memory type, or both. 😡

    If both of these are the case tho, its going to cause me to give this purchase a serious reconsidering because I’ve grown accustomed to 128MB of RAM (not SD or CF) in my devices; and my compulsion to upgrade will have been slightly reduced since I already have most of what the 5400 offers via PC Card Sleeve and transflective screen…

    Christopher

  6. I have both the 3970 and the 5450 I can say for sure that the screens are different. The 5450 screen has the best looking ClearType font than any of the iPAQ’s. On the other hand the color saturation/contrast/richness is far better on the 3970. It is actually a little disappointing.

  7. Hmmmm… well that’s going to be a problem.

    Better resolution, but the color quality isn’t as good as the 3900. How disappointing.

    This pending purchase is going to require some thought. Maybe the 5600 with GSM/GPRS when it is rumored to come out will be the better device to wait for…

    Christopher Spera

  8. Okay folks.

    How is the bonding going this weekend? Been pretty quiet about it, is it because you are absolutely mesmerized, or because you don’t want to tell us had bad it really is?

    I am on the verge of buying one, as this one finally seems to have all the right tools (except telephony). Just very curious about the instant messaging, handwriting capabilities (does that include translation of handwriting to text?), and memory, battery life, etc. oh, and what about Wi-Fi distance?

    Please oh please let us know soon.

    Thanks.

  9. Originally posted by rbright
    [B]Okay folks.

    How is the bonding going this weekend? Been pretty quiet about it, is it because you are absolutely mesmerized, or because you don’t want to tell us had bad it really is?
    [/B]

    Wow – those are two extreme opposites. I would say that it is more in the middle. I have had a few glitches with it this weekend – such as the WiFi deciding to completely quit working, necessitating a hard-reset, and losing the programs I put in File Store – probably because of the round-about way I tried to do the hard-reset (by “failing” the biometric scan seven times), but otherwise I am having a good experience.

    Originally posted by rbright
    I am on the verge of buying one, as this one finally seems to have all the right tools (except telephony). Just very curious about the instant messaging,

    It works really well with my home’s 802.11b setup.

    Originally posted by rbright
    handwriting capabilities (does that include translation of handwriting to text?),

    The 5455 comes with the same handwriting recognition and virtual keyboard programs that all other PPCs come with…

    Originally posted by rbright
    and memory, battery life, etc. oh, and what about Wi-Fi distance?

    Memory: It comes with 48MB ROM and 64MB RAM

    Battery Life: I am still running tests, but so far have got over 5 hours playing MP3s. I did find out that the battery monitor program I was using was giving me an inconsistant reading with what the iPAQ’s built-in battery meter was showing – so I may have judged the battery a bit harshly at first. I need to do a lot more tests, of course…

    WiFi distance: WOW – it is slightly better than the distance I get on my Fuji! I will easily be able to chat while sitting outside in the swing next spring (about a 45 foot stretch through a *very* well insulated house). I still get a 35% signal – not bad.

    Hope this helps,
    Judie :0)

  10. Have you tried the BT yet? Do you have a BT phone to try it with? I wonder if I had a BT earpiece, BT phone in my briefcase, and my Ipaq 5455 BT, if they would all work fine together.

    Any ideas? Any updates on your experiences to date with the new baby?

  11. Originally posted by rbright
    [B]Have you tried the BT yet? Do you have a BT phone to try it with? I wonder if I had a BT earpiece, BT phone in my briefcase, and my Ipaq 5455 BT, if they would all work fine together.

    Any ideas? Any updates on your experiences to date with the new baby? [/B]

    This combination works great you just need to use mPhone 2.5 or Running Voice GSM. There are others but I have found that mPhone 2.5 is the best solution. It gives you the ability to dial a contact from your Pocket PC. The application then releases the peer to peer BT connection so that the Headset and phone can talk. Works great.

    http://www.mobem.com for mPhone 2.5
    http://www.pocketpresence.com for Running Voice GSM (Their website seems to be down at the moment.

  12. Has anyone tried the VoIP (Voice over IP) feature yet? This sounds like an awesome feature if I can make calls over the net while I am connected to my LAN. Is there a charge for this service? Is the transmission clear?

    Thanks.

  13. Originally posted by rbright
    [B]Has anyone tried the VoIP (Voice over IP) feature yet? This sounds like an awesome feature if I can make calls over the net while I am connected to my LAN. Is there a charge for this service? Is the transmission clear?

    Thanks. [/B]

    You can do VoIP on your computer now, or any PC that can connect to an IP based network. There Phone2PC (or something like that) is a VoIP app that I have used to place IP based calls on my broadband connection to the ‘Net. The quality there wasn’t bad; and the rates (no it isn’t always free) were reasonable.

    I don’t know if there’s a specific VoIP app that comes with the 5455; but I would THINK that it should give the same basic quality as any other VoIP Phone app: the quality of your IP signal will effect the quality of the call.

    Christopher Spera

  14. …and I left it in the store. 😡

    The screen is similar to the 3900 series iPAQ, and it looks/ appears to be the same. The 48 MB ROM is a draw. I know this is going to/ should be upgradable to the next version OS. The Wireless 802.11b, BT are a draw. I don’t have that in my 3900 without the PC Card Sleeve and the proper PC Card (I only have an 802.11b card) Serial and Consumer IR come with the 3900; and Nevo is awesome!

    The biometric finger scanner insures that even tho my gadget may get stolen, they won’t steal my data. They’ll have to hard reset the device to get past the scanner.

    I think I want to wait until after Santa has come and gone before I shell out the $$ for this baby.

    Christopher Spera

  15. I heard that the Finger print scanner can be bypassed/Hacked by something like chewing gum or silly putty.

    I do not have my Eval to test this on but our Security guy assures me he can hack in in less than 10 minutes.

    Anyone here anything about this? We have a lot of VP’s that will be carrying these.

    Diz

  16. Originally posted by Dizzy Devil
    [B]I heard that the Finger print scanner can be bypassed/Hacked by something like chewing gum or silly putty.

    I do not have my Eval to test this on but our Security guy assures me he can hack in in less than 10 minutes.

    Anyone here anything about this? We have a lot of VP’s that will be carrying these.

    Diz [/B]

    I wouldn’t invest in many of these for your VPs yet. Have you read the pages and pages and pages of bugs and problem issues with the 5450 and 5455 yet? There are about 30 pages of bugs and technical problems on the brighthand site.

    It seems the wi-fi, the bt, the screens, the biometrics, the speakers, almost everything is completely falling apart. The bios needs an immediate update, etc.

    It took me a week to find a site with a thorough review and discussion group. Check it out before plunking down the money for even one of these bad boy (girls).

  17. 😮

    I WANT THE DETAILS!!

    If you have a security guy that can break the biometric security; then:

    1. I want to know how to do it.
    2. We need to define a work around.
    3. We need to get the information in front of HP via EVERY Pocket PC MVP on the planet.
    4. We need to push for some sort of IMMEDIATE ROM upgrade from HP.

    We have DBA’s that will be carrying these here at the office (as well as VP’s) so they can do remote DBA work from any point in the office. The only way we were able to get these in the door was due to the biometric security

    I knew that a device was susceptable to theft because of its size; but I was certain, based on information I’ve heard, read and seen, that tho a device was stolen, it would require the thief to do a hard reset on the device to be able to use it. If this is not the case, then I need to know how your guy can beat this.

    Kind Regards,

    Christopher Spera

  18. Originally posted by rbright
    It took me a week to find a site with a thorough review and discussion group. Check it out before plunking down the money for even one of these bad boy (girls).

    What site did you find this on? Can you post a URL?

    I’d like to see that list of known bugs/ issues. I have a long plane ride coming up for the holidays and need some good reading material.

    Christopher Spera

  19. Originally posted by ChrisSpera
    [B]What site did you find this on? Can you post a URL?

    I’d like to see that list of known bugs/ issues. I have a long plane ride coming up for the holidays and need some good reading material.

    Christopher Spera [/B]

    http://discussion.brighthand.com/showthread.php?s=&threadid=66672

    That is for the first half of the thread. They also started a part II because there are sooooooooo many complaints and issues.

    Looks like very bad news. I am glad I waited one more day to Not buy so I won’t have to deal with these for a while.

  20. Originally posted by Dizzy Devil
    [B]I heard that the Finger print scanner can be bypassed/Hacked by something like chewing gum or silly putty.

    I do not have my Eval to test this on but our Security guy assures me he can hack in in less than 10 minutes.

    Anyone here anything about this? We have a lot of VP’s that will be carrying these.

    Diz [/B]

    There is no way this could happen. People seem to think this type of security can be circumvented because the perception is that you press your finger on the screen. This couldn’t be farther from the truth.

    There is a little sensor under the D-Pad which you drag your finger over. The sensor reads the temperature difference between the ridges/peaks/valleys in your finger. No one else will have the same fingerprint and temperature profile as I do and silly putty or gum certainly won’t have it either.

  21. As Soon as I get back from Vacation…….. Ahhh Vacation…… ( Jan. 6th ) I will let the Security guy I spoke of have the HP 5450 and see what he can do and how he bypasses the Biometrics. He assures me this is a simple process and that he is Man for the Job. So I will let you know when/if and How he breaks it…..

    Diz

  22. I see the opening page now has comments by Judie or Chris or someone from 12/22/02.

    They are simply a small sampling and reiteration of the hundreds and hundreds of posting at brighthand completely trashing the Ipaq 5450/5455.

    Thank God for early adopters with review sites. Saved me tons of money, and saved me $700 just last week.

    Skip the 5450/5455 completely. Force HP to fix the HUNDREDS of errors and problems before pluking down a single dime for this current piece of trash.

    Thanks for this site to help inform me and others.

  23. Are you talking about the comments under “Judie’s Gear Diary”? If so, then wouldn’t it make sense that they were made by her? Why would you think that someone named Chris made them?

    The 5455 sounds like a dud. I am glad Julie and Judie told us that before I plunked down any money.

  24. Originally posted by Frito Bandito
    [B]Are you talking about the comments under “Judie’s Gear Diary”? If so, then wouldn’t it make sense that they were made by her? Why would you think that someone named Chris made them?

    The 5455 sounds like a dud. I am glad Julie and Judie told us that before I plunked down any money. [/B]

    Fact is, they were made by someone…. and Way way after all the walls came crashing in from the hundreds of postings on brighthand. It was good to see that she agreed with everything that everyone else has already been saying about the 5450/5455 for the past 2 weeks or more.

    Consensus all the way around. This is a DUD. AVOID it like that plaque.

  25. I am back in the Pocket PC camp after smashing the screen on my Zaurus. My lovely wife told me to get a replacement ASAP since I live on my PDA, so after some thought, went with the Toshiba e740. She did mutter something about Manolo Blahniks….

    In any case, I was debating the 5455 as well – it’s similar to the Toshiba in many ways. I do like the transreflective screen, but the form factor and style of the Toshiba – plus the CF – won out. I had a bad history with iPaqs, as well, and that had an impact on my decision.

    Glad I went with my choice. Besides, the Toshiba’s case goes so well with my Ti Powerbook.

    Speaking of which – PocketMac works pretty well!

  26. google for

    gummi bear fingerprint

    “Matsumoto tried these attacks against eleven commercially available fingerprint biometric systems, and was able to reliably fool all of them.” reliably seems to be 80% of attempts. Even Bruce Schneier was impressed.

    and note this involves lifting latent fingerprints, *not* merely working with a cooperative subject… It was back-to-the-drawing-board news back in may 2002; makes you wonder why a new device even bothered…

  27. Well after loaning the 5450 to our Security people for 2 days the response I got back from them is that they could not hack through the Scanner but could the Pin if it was set to either Or. I think he was acutally impressed with the Scanner. As far as other testing goes. The only problem we have encountered so far is the Battery life is low when using either WiFi or Bluetooth which we figured was going to happen. I let you know how things progress.

    I wouldn’t Plunk down a lot of Money for them. I still think they have a lot of bugs and I hope HP fixes them.

    Diz 🙂

  28. This and many other user groups have documented well over 100 bugs in the 5450/5455. Some very severe, some very minor.

    Still way way too many for a new HP product. There will probably be a HUGE refurb sale very soon on these at the HP site, as so many people are returning them.

    I can’t imagine anyone just living with the bugs at this price.

Leave a Reply to ChrisSpera Cancel Reply

Your email address will not be published. Required fields are marked *